Users

Bright Pattern Documentation

Generated: 1/29/2022 8:51 am
Content is available under license unless otherwise noted.

  1. REDIRECT 5.3:Contact-center-administrator-guide/UsersandTeams/Teams

  1. REDIRECT 5.3:Contact-center-administrator-guide/UsersandTeams/Roles

  1. REDIRECT 5.3:Agent-guide/Welcome

Purpose

The Bright Pattern Contact Center Supervisor Guide focuses exclusively on using the Agent Desktop application to perform supervisory tasks such as agent supervision, campaign management tasks, real-time monitoring of key contact center performance indicators and helping agents with call handling. The guide also explains tasks related to real-time campaign management. Note that the same application is also used by contact center agents to provide customer service over the phone. For descriptions of all tasks related to customer service, see the Bright Pattern Contact Center Agent Guide.



  1. REDIRECT 5.3:Contact-center-administrator-guide/Appendices/AgentDesktopHelperApplication

  1. REDIRECT 5.3:Contact-center-administrator-guide/Appendices/SystemRequirements





Privileges

Registered users of your Bright Pattern Contact Center solution are assigned privileges that can be used to control access to various contact center functions. Privileges are arranged in the same way as they appear on the Roles page of the Contact Center Administrator application. For general information about privileges and roles, see section Roles.

Note: Any supervisors using these privileges will apply toward your contact center's use license limit (i.e., the number of allowed supervisors).

Privileges are organized into seven categories (i.e., groups):

Note: Some service configuration changes that affect agent behavior are not picked up dynamically by Agent Desktop. Thus, after making a change to privileges, we recommend that all affected agents re-login to Agent Desktop.

Interaction Handling group

Access full-screen Agent Desktop

The Access full-screen Agent Desktop privilege allows the user to enable full-screen Agent Desktop view within CRM applications.

Because CRM systems typically have their own email and case management capabilities, the full-screen mode normally would be used by supervisors only.

Delete contacts

The Delete contacts privilege allows the deletion of contacts. If enabled, users can delete individual contacts via the Agent Desktop. When a contact is deleted, its activity history is deleted too. Cases are not deleted automatically.

Edit contacts

The Edit contacts privilege provides write access to contacts. If enabled, users can create new contacts, and users can modify any fields in existing contacts (but not activity history).

Force pop-out phone window

The Force pop-out phone window privilege allows the user to open Agent Desktop in a pop-out window. For more information, see section Understanding Screen-Pop of the Agent Guide.

Enabling this privilege is generally not recommended if you plan to deliver activity forms and/or other web content to agents via screen pop.

Note that if the user has any privileges in the Supervision group (see below), the user will not be able to open Agent Desktop in a pop-out window even if the user has this privilege.

Handle automatically distributed interactions

The Handle automatically distributed interactions allows the user to receive calls from a service queue and preview records. This is the basic privilege that allows the user to perform typical call center agent work (i.e., provide services over the phone and participate in outbound campaigns).

The ability to handle customer chat or email interactions is controlled via separate privileges (see Handle email and cases and Handle service chat).

Handle email and cases

When enabled, the Handle email and cases' privilege allows users to handle email interactions with customers as well as create and process customer cases, which may include interactions of any media type.

Handle leads

Reserved.

Handle service chats

With the Handle service chats privilege, the user may handle chat interactions with customers. This includes chat interactions started by customers via SMS.

Note that the ability to initiate a chat with a customer via SMS is controlled by a separate privilege (see Initiate SMS conversation). Likewise, the ability to use internal chat is controlled by a separate privilege (see Send internal chats).

Initiate SMS conversation

The Initiate SMS conversation privilege allows the user to initiate chats with customers via SMS.

Listen to call recordings and view chat transcripts on assigned services

With this privilege granted, the user may review call recordings and chat transcripts of the services that the user is qualified to handle (i.e., has corresponding service skills).

Listening to own call recordings and view own chat transcripts

This privilege provides Agent Desktop users the capability, via activity history, to access recordings where the agent participated (at least partially). This privilege applies to Agent Desktop only.

Login to Agent Desktop

Login to Agent Desktop allows the user to log in to Agent Desktop application and perform basic back-office telephony functions. Any user who needs access to Agent Desktop must have this privilege. Note that this privilege alone is not sufficient for performing typical contact center agent work.

Note that any user who logs into Agent Desktop will be counted as a concurrent user for the duration of the login session. Your service provider may impose a limit on how many of your users may be logged on concurrently.

Make external calls

A user with the Make external calls privilege may make external calls and blind transfers to external destinations from the Agent Desktop application. If the user does not have this privilege, an attempt to make an external call or blind transfer will result in a text error message displayed on Agent Desktop.

Note that the absence of this privilege does not prevent users from making external calls using the dial pad of their hardphones.

Mask interaction content

The Mask interaction content privilege allows the user to mask fragments of original customer email text, chat text, and images. For more information, see section How to Mask Sensitive Data of the Agent Guide. Note that prior to Bright Pattern Contact Center version 5.10.0 this setting was previously known as Mask original email content.

Modify own identification data

The Modify own identification data privilege allows the user to be able to modify specific fields of the user profile. If the privilege is not present, the following fields are locked:

See other agents/teams in directory

This privilege lets the user see all configured teams and team members in the Agent Desktop directory and view their current availability (presence). For more information, see section How to Use the Directory of the Agent Guide.

See other agents’ cases

See other agents’ cases allows the user to see cases handled by other agents. If the user does not have this privilege, the user will be able to see only cases that with which the user has worked. This privilege affects case search only. Absence of this privilege does not affect the user’s ability to receive emails related to existing cases that the user has not worked on.

Send internal chats

The Send internal chats privilege allows the user to initiate internal chat conversations.

Start recording of interactions

With this privilege, the user may start call recording.

Stop recording of interactions

Stop recording of interactions allows the user to stop call recording.

Transfer calls

The Transfer calls privilege allows the user to transfer customer interactions to consultation parties and host conferences (both via-consultation and single-step).

Absence of this privilege does not affect user’s ability to

Transfer cases

The Transfer cases privilege allows the user to transfer cases. When enabled, the Handle email and cases privilege allows users to handle email interactions with customers as well as create and process customer cases, which may include interactions of any media type.

Use Calendar

The Use Calendar privilege enables users to use the Agent Desktop calendar for scheduling.

Use Favorites tab

Use Favorites tab is an agent-level privilege that controls whether the user can see and set favorites from the Agent Desktop application. This privilege is an agent behavior control to prevent users from dialing destinations that they should not based on FCC/TCPA and organizational rules.

Use Recent Calls tab

The Use Recent Calls tab privilege lets the user restrict access to recent calls. This privilege uses TCPA manual dialing to limit which agents can access recent calls.

Use RightNow

Use RightNow allows the user to use Agent Desktop embedded into the Oracle Service Cloud application (formerly called RightNow). This privilege enables access to the Agent Desktop widget within Oracle Service Cloud.

For more information, see the Oracle Service Cloud Integration Guide.

Use ServiceNow

Use ServiceNow allows the user to use Agent Desktop embedded into the ServiceNow application. This privilege enables access to the Agent Desktop widget within ServiceNow.

For more information, see the ServiceNow Integration Guide.

Use Zendesk

With the Use Zendesk privilege, the user may use Agent Desktop embedded into the Zendesk application. This privilege enables access to the Agent Desktop widget within Zendesk. To enable full-screen Agent Desktop view within Zendesk application, the user must also have the Access full Agent Desktop privilege.

For more information, see the Zendesk Integration Guide.

View content of all emails

When enabled, View content of all emails allows users to view the contents of all email interactions, including those not associated with the services they are skilled to handle.

Bright Pattern Contact Center versions 5.9.0 and later will grant this privilege to all existing roles by default except those that have the BPO Reviewer privilege Listening to call recordings and view chat transcripts on services in reviewer role. This applies to the roles of:


Note that the behavior associated with this privilege was the default system behavior before version 5.9.0.

View content of emails on assigned services

When enabled, View content of emails on assigned services allows users to view the contents of email interactions associated only with the services they are skilled to handle (i.e., not all emails).

Within the Agent Desktop application, these viewing restrictions will be applied to all views where email content may appear. The general principles are that unauthorized agents:


For all case preview panes, these principles are implemented as follows:


For email draft view or case detail view, these principles are implemented as follows:


For a contact’s Activities detail pane, these principles are implemented as follows:

Quality Management

Accept/dispute evaluations of their interactions by others

Accept/dispute evaluations of their interactions by others allows the user to accept or dispute a quality management evaluation of herself.

Assign evaluations and calibrations

Assign evaluations and calibrations allows the user to assign quality management evaluations and calibrations to other users.

Confirm evaluations of supervised agents

Confirm evaluations of supervised agents allows the user to accept or dispute quality management evaluations of users with the Supervisor role.

Delete evals completed by anyone

Delete evals completed by anyone allows the user to delete evaluations of agents in the user's assigned team unless the privilege Manage evaluations across teams is enabled for the same user.

Delete evals completed by themselves

Delete evals completed by themselves allows the user to delete quality management evaluations completed by himself.

Edit evaluation forms

Edit evaluation forms allows the user to edit quality management evaluation forms in the Evaluation Form Editor application. Note that if a form is assigned to a service or campaign, to edit it, one needs either the Manage all services and campaigns privilege or the Manage assigned services and campaigns privilege to edit that service.

Edit public interaction searches

Edit public interaction searches allows the user to edit the public searches seen in the Agent Desktop application, section Quality Management > Eval Home.

Evaluate agent interactions

Evaluate agent interactions allows the user to evaluate agent interactions in the Agent Desktop application, section Quality Management when feature Quality Management Pro is on. If feature Quality Management Pro is off this privilege allows the user to grade interactions while monitoring them in real-time via Agent Desktop while reviewing their recordings and transcripts via the Contact Center Administrator application.

Evaluate own interactions

Evaluate own interactions allows users to evaluate their own interactions and is assigned to agents by default; supervisors or evaluators are meant to confirm these evaluations. Note that these evaluations can be confirmed by a user's supervisor or a supervisor assigned to a user's team only.

Manage evaluations across teams

Manage evaluations across teams removes the restriction of only applying actions and accessing the quality management evaluations of the agents in the teams assigned to the user.

See evals of self

See evals of self allows the user to see quality management evaluations of herself as completed by other users.

Security Administration group

Can edit and erase interaction records

This privilege must be assigned to the user account used for retrieval of interaction content and related metadata via the Interaction Content API.


Grant all privileges

Grant all privileges allows the user to grant any privilege, regardless of the user's May grant or revoke settings with respect to specific privileges. This is helpful during product upgrades where new privileges may be introduced.

Manage roles and security settings

With this privilege enabled, the user has full access to the following settings:

Service and Campaign Administration group

Configure reporting settings

With this privilege enabled, the user has full access to the following settings:

Configure system-wide settings

The Configure system-wide settings privilege gives the user full access to all pages of the following menus: Tasks, Call Center Configuration, and Quality Management.

For tasks, note that all users who have the Configure system-wide settings privilege enabled will receive an email notification each time a scheduled task fails.

Control campaign operations

Control campaign operations enables the user to view and control assigned campaigns via Agent Desktop.

A user must have this privilege in order to be available for selection as a service/campaign operator via the Services and Campaigns > Assignments page. In the Agent Desktop application, access will be limited to campaigns where the user is assigned as an operator.

If this privilege is revoked from a user, the user's name will appear in red color in the list of operators of any services/campaigns that the user may have been previously assigned to operate.

Edit knowledge base

The Edit knowledge base privilege gives the user full access to the Knowledge Base via the Contact Center Administrator application. It also allows the user to create articles in the Knowledge Base via the Agent Desktop application.

Note that access to the Knowledge Base via the Agent Desktop application is provided in the context of the services that the user can handle.

Manage leads

Reserved.

Manage all services and campaigns

The Manage all services and campaigns privilege allows the user to configure all existing services campaigns regardless of whether the user is assigned to them as an administrator. Note that in order to assign teams to campaigns, the user must also have the Manage teams privilege.

Another privilege exists to enable the user to access only assigned services campaigns (see below). Note that in order to prevent the user from creating new services and campaigns, both these privileges must be disabled.

Manage assigned services and campaigns

With this privilege, the user has full access to configuration of the services and campaigns that the user is assigned to as an administrator. For more information, see section Services and Campaigns - Assignments Tab.

Note that in order to assign teams to a service/campaign, the user must also have the Manage teams privilege.

Another privilege exists to enable the user to access all configured campaigns regardless of assignment (see above). Note that in order to prevent the user from creating new campaigns, both these privileges must be disabled.

Manage lists

The Manage lists privilege gives the user full access to calling lists and do-not-call (DNC) lists. Absence of this privilege does not affect the user’s ability to associate existing lists with campaigns.

Manage scenarios

The Manage scenarios privilege allows the user to create, view, and edit scenarios. Absence of this privilege does not affect the user’s ability to configure scenario entries and associate such entries with existing scenarios.

Manage skills

With the Manage skills privilege, the user may create and edit existing auxiliary skills and assign skills to agents with specific levels.

Use SMS/MMS API

This privilege must be assigned to the user account used for authentication of SMS/MMS API requests.

Supervision group

All assigned teams combined view

When enabled, this privilege will show, on the supervisor's home screen, the agents from all teams assigned to the logged in supervisor, specifically with the following metrics:

It shows all services that are the teams are assigned to (individual services can be hidden if needed), specifically the following metrics:

Change alert configuration

Users with the Change alert configuration privilege may enable/disable alerts available for some real-time metric displayed via Agent Desktop, change their appearance, and modify threshold values that trigger such alerts.

Note that the ability to set configured alerts as system-wide defaults is controlled via a separate privilege (see Set alerts for real-time metrics system-wide).

If the user does not have this privilege, the Alert Configuration dialog of the Agent Desktop will provide read-only information about the current alert configuration.

Change real-time metric views

The Change real-time metric views privilege allows the user to add metrics to, and remove them from, any real-time metric views of the Agent Desktop application. The user may also change the order in which the metrics appear in the table views.

Absence of this privilege does not affect the user’s ability to add services and campaigns to, and remove them from, real-time metric views.

Note that the ability to set created real-time metric views as system-wide defaults is controlled via a separate privilege (see Set real-time metric views system-wide).

Define/View subteams of selected agents

The privilege Define/View subteams of selected agents enables subteam controls to be displayed in Agent Desktop and the Reports portal. In addition, the privilege allows users to switch between them. Subteams are smaller groups of agents that supervisors have selected from full teams.

Force agent states

The Force agent states privilege allows the user to change current agent states of members of any team that the user is assigned to supervise.

Monitor agent screen

When enabled, the Monitor agent screen privilege allows the user to view and monitor the screens of a selected agent that the user is assigned to supervise.

Monitor interactions

The Monitor interactions privilege allows the user to connect to calls handled by agents that the user is assigned to supervise in silent monitoring, coaching, and barge-in modes. For more information, see section Call Monitoring, Coaching and Barge-In of the Supervisor Guide.

Set alerts for real-time metrics system-wide

This privilege allows the user to set alerts that the user configures as system-wide defaults. Note that in order to use this privilege, the user must also have privilege Change alert configuration.

Set real-time metric views system wide

Set real-time metric views system wide allows the user to set real-time metric views that the user configures as system-wide defaults. Note that in order to use this privilege, the user must also have the privilege Change real-time metric views.

For more information, see section Customization of Metric Views of the Supervisor Guide.

View real-time agent metrics

View real-time agent metrics allows the user to view real-time metrics for the agents of the teams that the user is assigned to supervise.

View real-time service metrics

With View real-time service metrics, the user may view real-time metrics for all services associated with the teams that the user is assigned to supervise.

Absence of this privilege does not affect the user’s ability to view campaign-specific metrics. To prevent access to these metrics, use privilege Control campaign operations (see above).

System Administration group

Privileges associated with system administration are described as follows.

Allow recording export API access

This privilege must be assigned to the user account used for retrieval of interaction content and related metadata via the Interaction Content API].

Bulk Export/Import Contacts

When enabled, the privilege Bulk Export/Import Contacts allows the export/import icon on the Agent Desktop Contacts screen to be shown.

Bypass Single Sign-On

Users with this privilege can log in to any Bright Pattern application (e.g., Contact Center Administrator, Agent Desktop, etc.) via a direct authentication method (i.e., with Bright Pattern username and password), even if a corporate-level single sign-on (SSO) is configured for the given contact center.

Reasons for bypassing a single sign-on environment could include the need to provide only short-term access to a specific user (i.e., local, temporary account creation) or as a backup sign-in procedure should the SSO process not function as desired.

Users without the privilege should not be able to log in with their Bright Pattern credentials when SSO is enabled; they should, however, be able to log in when it is disabled. By default, this privilege is enabled only for the pre-defined System Administrator role.

If SSO is configured for a contact center, users with this privilege can bypass single sign-on by using special URLs that take the following form:

https://<tenant.domain.com>/admin/?bypass-sso=1

https://<tenant.domain.com>/agentdesktop/?bypass-sso=1

Configure Contact Forms and fields

The Configure Contact Forms and field privilege allows users to edit contact, activity history, and augmentation and case forms.

Configure directory

The Configure directory privilege allows the user to create and modify external contacts that appear in the Directory of the Agent Desktop application.

Manage BPO Clients

When enabled, the Manage BPO Clients privilege allows users to:

Manage all teams

If granted the Manage all teams privilege, the user may


For more information, see sections Users, Teams, and Skill Levels.

Note that if a user is assigned as a supervisor of a particular team, the absence of this privilege does not affect the user’s ability to change most of the configuration settings of the given team and its current members.

Manage phones

The Manage phones privilege gives the user full access to configuration of softphones, hardphones, access numbers, and scenario entries. Absence of this privilege does not affect the user’s ability to assign phone numbers to users.

Manage users

The Manage users privilege allows the user to create users and change the configuration of existing users within the team he is part of or that he is a supervisor of.

Privileged Access IP Range

The Privileged Access IP Range privilege allows users (e.g., administrators) to be able to log in to the system from any IP address (e.g., a public place such as a coffee shop). Without this privilege, users can only log in from specific IP addresses.

Publish help

Publish help gives the user full access to configuring help screens.

View audit log

With the View audit log privilege, the user can view the audit log.

View usage data

The View usage data privilege allows the user to access to reports about usage of telecom carriers’ resources via Contact Center Administrator > Reports > Usage.

Miscellaneous Management Functions group

Access Real-time Stats API

The Access Real-time Stats API privilege gives the user access to applications that are connected to Bright Pattern Contact Center via the Real-time Stats API; this includes viewing the wallboard application. Note: The availability of data on the Agent Desktop Home Screen is not affected by this privilege, with the exception of the wallboard icon.

Can see contents of email push queues

This privilege allows supervisors of teams with the push distribution method enabled to view push queues. Push queue items appear in team queues when the “All Services with Push Queues” option is selected; however, it is possible to select only one service and see only its queue.

While looking at a push queue, a supervisor can:

Note that this setting is not assigned to any roles by default.

Can update final dispositions

This privilege enables users to update dispositions when final. A final disposition can be updated in the interaction record by clicking the Change Disposition Change-Disposition-Button-53.PNG button. For more, see the Agent Guide.


For more information about interaction records, see section Interaction Records Search and Search Results.

Can use agent seat maps

This privilege is reserved.

Customize Wallboards

The Customize Wallboards privilege allows additional elements to appear on the user's wallboard. These elements include title, selector, flip arrows, and menu. Using these elements, users can customize the look and display of their Agent Desktop wallboard. Using the Wallboard Layout Editor, cards and cells can be added, deleted, scaled, and expanded using mouseovers, click-and-drag, and drag-and-drop movements.

Delete cases

The Delete cases privilege allows the deletion of cases. If enabled, users can delete individual cases via the Agent Desktop. When a case is deleted, all interactions related to a case are deleted.

Download recordings and transcripts

With this privilege, the user may download call/screen recordings, chat transcripts, and email messages from the interaction search and review pages of the Contact Center Administrator application.

Listen to recordings linked to external CRM records

This privilege allows the user to listen to call recordings linked to activity history in the CRM records.

Listening to all call recordings and view all chat transcripts

With Listening to all call recordings and view all chat transcripts, the user may review voice recordings and chat transcripts via the Contact Center Administrator application.

Absence of this privilege does not affect the user’s ability to review screen recordings in the Agent Timeline or email messages in the Interaction Search.

When removing this privilege from a user, make sure this user also does not have the privilege Listen to call recordings and view chat transcripts for assigned services in the BPO Client group (see below).

Manage canned chat responses system-wide

The Manage canned chat responses system-wide privilege allows the user to make canned chat responses available to all other agents of the contact center. For more information, see section How to Create and Edit Canned Chat Responses of the Agent Guide.

Pull screen pop

Pull screen pop allows the user to get snapshots of the Context Information Area of the desktops of agents that the user is assigned to supervise. Note that in order to be able to get a snapshot, the user must be connected to the agent in one of the call monitoring modes. Thus, the user also must have the privilege Monitor interactions (see above).

Push/Pull Global Wallboards

Users with the privilege Push/Pull Global Wallboards can push their personal wallboards to other users and/or teams, as well as pull shared wallboards from a global pool. Note that only global wallboards can be pulled.

View historical reports

The View historical reports privilege allows the user to generate and view reports via the Contact Center Administrator application. Absence of this privilege does not affect the user’s ability to access any of the general reporting settings or be a recipient of emailed scheduled reports.

View interaction records

With this privilege, the user may search for and review interaction records via the Contact Center Administrator application.

Absence of this privilege does not affect the user’s ability to generate and view the Call Detail Report or Email Detail Report. To prevent access to these reports, use privilege View historical reports (see above).

Watch agent screen recordings

The privilege Watch agent screen recordings allows supervisors to search for and view the screen recording sessions of agents on their teams. The screen recordings appear in interaction records in agent timeline searches. If a screen recording is available for the selected agent, and if the privilege is enabled, then the Watch screen recording button is shown to the supervisor.


BPO Client group

Listening to call recordings and view chat transcripts on services in reviewer role

With this privilege granted, the user may listen to call recordings and view chat transcripts of the services to which the user is assigned as a reviewer.




Privileges

Registered users of your Bright Pattern Contact Center solution are assigned privileges that can be used to control access to various contact center functions. Privileges are arranged in the same way as they appear on the Roles page of the Contact Center Administrator application. For general information about privileges and roles, see section Roles.

Note: Any supervisors using these privileges will apply toward your contact center's use license limit (i.e., the number of allowed supervisors).

Privileges are organized into seven categories (i.e., groups):

Note: Some service configuration changes that affect agent behavior are not picked up dynamically by Agent Desktop. Thus, after making a change to privileges, we recommend that all affected agents re-login to Agent Desktop.

Interaction Handling group

Access full-screen Agent Desktop

The Access full-screen Agent Desktop privilege allows the user to enable full-screen Agent Desktop view within CRM applications.

Because CRM systems typically have their own email and case management capabilities, the full-screen mode normally would be used by supervisors only.

Delete contacts

The Delete contacts privilege allows the deletion of contacts. If enabled, users can delete individual contacts via the Agent Desktop. When a contact is deleted, its activity history is deleted too. Cases are not deleted automatically.

Edit contacts

The Edit contacts privilege provides write access to contacts. If enabled, users can create new contacts, and users can modify any fields in existing contacts (but not activity history).

Force pop-out phone window

The Force pop-out phone window privilege allows the user to open Agent Desktop in a pop-out window. For more information, see section Understanding Screen-Pop of the Agent Guide.

Enabling this privilege is generally not recommended if you plan to deliver activity forms and/or other web content to agents via screen pop.

Note that if the user has any privileges in the Supervision group (see below), the user will not be able to open Agent Desktop in a pop-out window even if the user has this privilege.

Handle automatically distributed interactions

The Handle automatically distributed interactions allows the user to receive calls from a service queue and preview records. This is the basic privilege that allows the user to perform typical call center agent work (i.e., provide services over the phone and participate in outbound campaigns).

The ability to handle customer chat or email interactions is controlled via separate privileges (see Handle email and cases and Handle service chat).

Handle email and cases

When enabled, the Handle email and cases' privilege allows users to handle email interactions with customers as well as create and process customer cases, which may include interactions of any media type.

Handle leads

Reserved.

Handle service chats

With the Handle service chats privilege, the user may handle chat interactions with customers. This includes chat interactions started by customers via SMS.

Note that the ability to initiate a chat with a customer via SMS is controlled by a separate privilege (see Initiate SMS conversation). Likewise, the ability to use internal chat is controlled by a separate privilege (see Send internal chats).

Initiate SMS conversation

The Initiate SMS conversation privilege allows the user to initiate chats with customers via SMS.

Listen to call recordings and view chat transcripts on assigned services

With this privilege granted, the user may review call recordings and chat transcripts of the services that the user is qualified to handle (i.e., has corresponding service skills).

Listening to own call recordings and view own chat transcripts

This privilege provides Agent Desktop users the capability, via activity history, to access recordings where the agent participated (at least partially). This privilege applies to Agent Desktop only.

Login to Agent Desktop

Login to Agent Desktop allows the user to log in to Agent Desktop application and perform basic back-office telephony functions. Any user who needs access to Agent Desktop must have this privilege. Note that this privilege alone is not sufficient for performing typical contact center agent work.

Note that any user who logs into Agent Desktop will be counted as a concurrent user for the duration of the login session. Your service provider may impose a limit on how many of your users may be logged on concurrently.

Make external calls

A user with the Make external calls privilege may make external calls and blind transfers to external destinations from the Agent Desktop application. If the user does not have this privilege, an attempt to make an external call or blind transfer will result in a text error message displayed on Agent Desktop.

Note that the absence of this privilege does not prevent users from making external calls using the dial pad of their hardphones.

Mask interaction content

The Mask interaction content privilege allows the user to mask fragments of original customer email text, chat text, and images. For more information, see section How to Mask Sensitive Data of the Agent Guide. Note that prior to Bright Pattern Contact Center version 5.10.0 this setting was previously known as Mask original email content.

Modify own identification data

The Modify own identification data privilege allows the user to be able to modify specific fields of the user profile. If the privilege is not present, the following fields are locked:

See other agents/teams in directory

This privilege lets the user see all configured teams and team members in the Agent Desktop directory and view their current availability (presence). For more information, see section How to Use the Directory of the Agent Guide.

See other agents’ cases

See other agents’ cases allows the user to see cases handled by other agents. If the user does not have this privilege, the user will be able to see only cases that with which the user has worked. This privilege affects case search only. Absence of this privilege does not affect the user’s ability to receive emails related to existing cases that the user has not worked on.

Send internal chats

The Send internal chats privilege allows the user to initiate internal chat conversations.

Start recording of interactions

With this privilege, the user may start call recording.

Stop recording of interactions

Stop recording of interactions allows the user to stop call recording.

Transfer calls

The Transfer calls privilege allows the user to transfer customer interactions to consultation parties and host conferences (both via-consultation and single-step).

Absence of this privilege does not affect user’s ability to

Transfer cases

The Transfer cases privilege allows the user to transfer cases. When enabled, the Handle email and cases privilege allows users to handle email interactions with customers as well as create and process customer cases, which may include interactions of any media type.

Use Calendar

The Use Calendar privilege enables users to use the Agent Desktop calendar for scheduling.

Use Favorites tab

Use Favorites tab is an agent-level privilege that controls whether the user can see and set favorites from the Agent Desktop application. This privilege is an agent behavior control to prevent users from dialing destinations that they should not based on FCC/TCPA and organizational rules.

Use Recent Calls tab

The Use Recent Calls tab privilege lets the user restrict access to recent calls. This privilege uses TCPA manual dialing to limit which agents can access recent calls.

Use RightNow

Use RightNow allows the user to use Agent Desktop embedded into the Oracle Service Cloud application (formerly called RightNow). This privilege enables access to the Agent Desktop widget within Oracle Service Cloud.

For more information, see the Oracle Service Cloud Integration Guide.

Use ServiceNow

Use ServiceNow allows the user to use Agent Desktop embedded into the ServiceNow application. This privilege enables access to the Agent Desktop widget within ServiceNow.

For more information, see the ServiceNow Integration Guide.

Use Zendesk

With the Use Zendesk privilege, the user may use Agent Desktop embedded into the Zendesk application. This privilege enables access to the Agent Desktop widget within Zendesk. To enable full-screen Agent Desktop view within Zendesk application, the user must also have the Access full Agent Desktop privilege.

For more information, see the Zendesk Integration Guide.

View content of all emails

When enabled, View content of all emails allows users to view the contents of all email interactions, including those not associated with the services they are skilled to handle.

Bright Pattern Contact Center versions 5.9.0 and later will grant this privilege to all existing roles by default except those that have the BPO Reviewer privilege Listening to call recordings and view chat transcripts on services in reviewer role. This applies to the roles of:


Note that the behavior associated with this privilege was the default system behavior before version 5.9.0.

View content of emails on assigned services

When enabled, View content of emails on assigned services allows users to view the contents of email interactions associated only with the services they are skilled to handle (i.e., not all emails).

Within the Agent Desktop application, these viewing restrictions will be applied to all views where email content may appear. The general principles are that unauthorized agents:


For all case preview panes, these principles are implemented as follows:


For email draft view or case detail view, these principles are implemented as follows:


For a contact’s Activities detail pane, these principles are implemented as follows:

Quality Management

Accept/dispute evaluations of their interactions by others

Accept/dispute evaluations of their interactions by others allows the user to accept or dispute a quality management evaluation of herself.

Assign evaluations and calibrations

Assign evaluations and calibrations allows the user to assign quality management evaluations and calibrations to other users.

Confirm evaluations of supervised agents

Confirm evaluations of supervised agents allows the user to accept or dispute quality management evaluations of users with the Supervisor role.

Delete evals completed by anyone

Delete evals completed by anyone allows the user to delete evaluations of agents in the user's assigned team unless the privilege Manage evaluations across teams is enabled for the same user.

Delete evals completed by themselves

Delete evals completed by themselves allows the user to delete quality management evaluations completed by himself.

Edit evaluation forms

Edit evaluation forms allows the user to edit quality management evaluation forms in the Evaluation Form Editor application. Note that if a form is assigned to a service or campaign, to edit it, one needs either the Manage all services and campaigns privilege or the Manage assigned services and campaigns privilege to edit that service.

Edit public interaction searches

Edit public interaction searches allows the user to edit the public searches seen in the Agent Desktop application, section Quality Management > Eval Home.

Evaluate agent interactions

Evaluate agent interactions allows the user to evaluate agent interactions in the Agent Desktop application, section Quality Management when feature Quality Management Pro is on. If feature Quality Management Pro is off this privilege allows the user to grade interactions while monitoring them in real-time via Agent Desktop while reviewing their recordings and transcripts via the Contact Center Administrator application.

Evaluate own interactions

Evaluate own interactions allows users to evaluate their own interactions and is assigned to agents by default; supervisors or evaluators are meant to confirm these evaluations. Note that these evaluations can be confirmed by a user's supervisor or a supervisor assigned to a user's team only.

Manage evaluations across teams

Manage evaluations across teams removes the restriction of only applying actions and accessing the quality management evaluations of the agents in the teams assigned to the user.

See evals of self

See evals of self allows the user to see quality management evaluations of herself as completed by other users.

Security Administration group

Can edit and erase interaction records

This privilege must be assigned to the user account used for retrieval of interaction content and related metadata via the Interaction Content API.


Grant all privileges

Grant all privileges allows the user to grant any privilege, regardless of the user's May grant or revoke settings with respect to specific privileges. This is helpful during product upgrades where new privileges may be introduced.

Manage roles and security settings

With this privilege enabled, the user has full access to the following settings:

Service and Campaign Administration group

Configure reporting settings

With this privilege enabled, the user has full access to the following settings:

Configure system-wide settings

The Configure system-wide settings privilege gives the user full access to all pages of the following menus: Tasks, Call Center Configuration, and Quality Management.

For tasks, note that all users who have the Configure system-wide settings privilege enabled will receive an email notification each time a scheduled task fails.

Control campaign operations

Control campaign operations enables the user to view and control assigned campaigns via Agent Desktop.

A user must have this privilege in order to be available for selection as a service/campaign operator via the Services and Campaigns > Assignments page. In the Agent Desktop application, access will be limited to campaigns where the user is assigned as an operator.

If this privilege is revoked from a user, the user's name will appear in red color in the list of operators of any services/campaigns that the user may have been previously assigned to operate.

Edit knowledge base

The Edit knowledge base privilege gives the user full access to the Knowledge Base via the Contact Center Administrator application. It also allows the user to create articles in the Knowledge Base via the Agent Desktop application.

Note that access to the Knowledge Base via the Agent Desktop application is provided in the context of the services that the user can handle.

Manage leads

Reserved.

Manage all services and campaigns

The Manage all services and campaigns privilege allows the user to configure all existing services campaigns regardless of whether the user is assigned to them as an administrator. Note that in order to assign teams to campaigns, the user must also have the Manage teams privilege.

Another privilege exists to enable the user to access only assigned services campaigns (see below). Note that in order to prevent the user from creating new services and campaigns, both these privileges must be disabled.

Manage assigned services and campaigns

With this privilege, the user has full access to configuration of the services and campaigns that the user is assigned to as an administrator. For more information, see section Services and Campaigns - Assignments Tab.

Note that in order to assign teams to a service/campaign, the user must also have the Manage teams privilege.

Another privilege exists to enable the user to access all configured campaigns regardless of assignment (see above). Note that in order to prevent the user from creating new campaigns, both these privileges must be disabled.

Manage lists

The Manage lists privilege gives the user full access to calling lists and do-not-call (DNC) lists. Absence of this privilege does not affect the user’s ability to associate existing lists with campaigns.

Manage scenarios

The Manage scenarios privilege allows the user to create, view, and edit scenarios. Absence of this privilege does not affect the user’s ability to configure scenario entries and associate such entries with existing scenarios.

Manage skills

With the Manage skills privilege, the user may create and edit existing auxiliary skills and assign skills to agents with specific levels.

Use SMS/MMS API

This privilege must be assigned to the user account used for authentication of SMS/MMS API requests.

Supervision group

All assigned teams combined view

When enabled, this privilege will show, on the supervisor's home screen, the agents from all teams assigned to the logged in supervisor, specifically with the following metrics:

It shows all services that are the teams are assigned to (individual services can be hidden if needed), specifically the following metrics:

Change alert configuration

Users with the Change alert configuration privilege may enable/disable alerts available for some real-time metric displayed via Agent Desktop, change their appearance, and modify threshold values that trigger such alerts.

Note that the ability to set configured alerts as system-wide defaults is controlled via a separate privilege (see Set alerts for real-time metrics system-wide).

If the user does not have this privilege, the Alert Configuration dialog of the Agent Desktop will provide read-only information about the current alert configuration.

Change real-time metric views

The Change real-time metric views privilege allows the user to add metrics to, and remove them from, any real-time metric views of the Agent Desktop application. The user may also change the order in which the metrics appear in the table views.

Absence of this privilege does not affect the user’s ability to add services and campaigns to, and remove them from, real-time metric views.

Note that the ability to set created real-time metric views as system-wide defaults is controlled via a separate privilege (see Set real-time metric views system-wide).

Define/View subteams of selected agents

The privilege Define/View subteams of selected agents enables subteam controls to be displayed in Agent Desktop and the Reports portal. In addition, the privilege allows users to switch between them. Subteams are smaller groups of agents that supervisors have selected from full teams.

Force agent states

The Force agent states privilege allows the user to change current agent states of members of any team that the user is assigned to supervise.

Monitor agent screen

When enabled, the Monitor agent screen privilege allows the user to view and monitor the screens of a selected agent that the user is assigned to supervise.

Monitor interactions

The Monitor interactions privilege allows the user to connect to calls handled by agents that the user is assigned to supervise in silent monitoring, coaching, and barge-in modes. For more information, see section Call Monitoring, Coaching and Barge-In of the Supervisor Guide.

Set alerts for real-time metrics system-wide

This privilege allows the user to set alerts that the user configures as system-wide defaults. Note that in order to use this privilege, the user must also have privilege Change alert configuration.

Set real-time metric views system wide

Set real-time metric views system wide allows the user to set real-time metric views that the user configures as system-wide defaults. Note that in order to use this privilege, the user must also have the privilege Change real-time metric views.

For more information, see section Customization of Metric Views of the Supervisor Guide.

View real-time agent metrics

View real-time agent metrics allows the user to view real-time metrics for the agents of the teams that the user is assigned to supervise.

View real-time service metrics

With View real-time service metrics, the user may view real-time metrics for all services associated with the teams that the user is assigned to supervise.

Absence of this privilege does not affect the user’s ability to view campaign-specific metrics. To prevent access to these metrics, use privilege Control campaign operations (see above).

System Administration group

Privileges associated with system administration are described as follows.

Allow recording export API access

This privilege must be assigned to the user account used for retrieval of interaction content and related metadata via the Interaction Content API].

Bulk Export/Import Contacts

When enabled, the privilege Bulk Export/Import Contacts allows the export/import icon on the Agent Desktop Contacts screen to be shown.

Bypass Single Sign-On

Users with this privilege can log in to any Bright Pattern application (e.g., Contact Center Administrator, Agent Desktop, etc.) via a direct authentication method (i.e., with Bright Pattern username and password), even if a corporate-level single sign-on (SSO) is configured for the given contact center.

Reasons for bypassing a single sign-on environment could include the need to provide only short-term access to a specific user (i.e., local, temporary account creation) or as a backup sign-in procedure should the SSO process not function as desired.

Users without the privilege should not be able to log in with their Bright Pattern credentials when SSO is enabled; they should, however, be able to log in when it is disabled. By default, this privilege is enabled only for the pre-defined System Administrator role.

If SSO is configured for a contact center, users with this privilege can bypass single sign-on by using special URLs that take the following form:

https://<tenant.domain.com>/admin/?bypass-sso=1

https://<tenant.domain.com>/agentdesktop/?bypass-sso=1

Configure Contact Forms and fields

The Configure Contact Forms and field privilege allows users to edit contact, activity history, and augmentation and case forms.

Configure directory

The Configure directory privilege allows the user to create and modify external contacts that appear in the Directory of the Agent Desktop application.

Manage BPO Clients

When enabled, the Manage BPO Clients privilege allows users to:

Manage all teams

If granted the Manage all teams privilege, the user may


For more information, see sections Users, Teams, and Skill Levels.

Note that if a user is assigned as a supervisor of a particular team, the absence of this privilege does not affect the user’s ability to change most of the configuration settings of the given team and its current members.

Manage phones

The Manage phones privilege gives the user full access to configuration of softphones, hardphones, access numbers, and scenario entries. Absence of this privilege does not affect the user’s ability to assign phone numbers to users.

Manage users

The Manage users privilege allows the user to create users and change the configuration of existing users within the team he is part of or that he is a supervisor of.

Privileged Access IP Range

The Privileged Access IP Range privilege allows users (e.g., administrators) to be able to log in to the system from any IP address (e.g., a public place such as a coffee shop). Without this privilege, users can only log in from specific IP addresses.

Publish help

Publish help gives the user full access to configuring help screens.

View audit log

With the View audit log privilege, the user can view the audit log.

View usage data

The View usage data privilege allows the user to access to reports about usage of telecom carriers’ resources via Contact Center Administrator > Reports > Usage.

Miscellaneous Management Functions group

Access Real-time Stats API

The Access Real-time Stats API privilege gives the user access to applications that are connected to Bright Pattern Contact Center via the Real-time Stats API; this includes viewing the wallboard application. Note: The availability of data on the Agent Desktop Home Screen is not affected by this privilege, with the exception of the wallboard icon.

Can see contents of email push queues

This privilege allows supervisors of teams with the push distribution method enabled to view push queues. Push queue items appear in team queues when the “All Services with Push Queues” option is selected; however, it is possible to select only one service and see only its queue.

While looking at a push queue, a supervisor can:

Note that this setting is not assigned to any roles by default.

Can update final dispositions

This privilege enables users to update dispositions when final. A final disposition can be updated in the interaction record by clicking the Change Disposition Change-Disposition-Button-53.PNG button. For more, see the Agent Guide.


For more information about interaction records, see section Interaction Records Search and Search Results.

Can use agent seat maps

This privilege is reserved.

Customize Wallboards

The Customize Wallboards privilege allows additional elements to appear on the user's wallboard. These elements include title, selector, flip arrows, and menu. Using these elements, users can customize the look and display of their Agent Desktop wallboard. Using the Wallboard Layout Editor, cards and cells can be added, deleted, scaled, and expanded using mouseovers, click-and-drag, and drag-and-drop movements.

Delete cases

The Delete cases privilege allows the deletion of cases. If enabled, users can delete individual cases via the Agent Desktop. When a case is deleted, all interactions related to a case are deleted.

Download recordings and transcripts

With this privilege, the user may download call/screen recordings, chat transcripts, and email messages from the interaction search and review pages of the Contact Center Administrator application.

Listen to recordings linked to external CRM records

This privilege allows the user to listen to call recordings linked to activity history in the CRM records.

Listening to all call recordings and view all chat transcripts

With Listening to all call recordings and view all chat transcripts, the user may review voice recordings and chat transcripts via the Contact Center Administrator application.

Absence of this privilege does not affect the user’s ability to review screen recordings in the Agent Timeline or email messages in the Interaction Search.

When removing this privilege from a user, make sure this user also does not have the privilege Listen to call recordings and view chat transcripts for assigned services in the BPO Client group (see below).

Manage canned chat responses system-wide

The Manage canned chat responses system-wide privilege allows the user to make canned chat responses available to all other agents of the contact center. For more information, see section How to Create and Edit Canned Chat Responses of the Agent Guide.

Pull screen pop

Pull screen pop allows the user to get snapshots of the Context Information Area of the desktops of agents that the user is assigned to supervise. Note that in order to be able to get a snapshot, the user must be connected to the agent in one of the call monitoring modes. Thus, the user also must have the privilege Monitor interactions (see above).

Push/Pull Global Wallboards

Users with the privilege Push/Pull Global Wallboards can push their personal wallboards to other users and/or teams, as well as pull shared wallboards from a global pool. Note that only global wallboards can be pulled.

View historical reports

The View historical reports privilege allows the user to generate and view reports via the Contact Center Administrator application. Absence of this privilege does not affect the user’s ability to access any of the general reporting settings or be a recipient of emailed scheduled reports.

View interaction records

With this privilege, the user may search for and review interaction records via the Contact Center Administrator application.

Absence of this privilege does not affect the user’s ability to generate and view the Call Detail Report or Email Detail Report. To prevent access to these reports, use privilege View historical reports (see above).

Watch agent screen recordings

The privilege Watch agent screen recordings allows supervisors to search for and view the screen recording sessions of agents on their teams. The screen recordings appear in interaction records in agent timeline searches. If a screen recording is available for the selected agent, and if the privilege is enabled, then the Watch screen recording button is shown to the supervisor.


BPO Client group

Listening to call recordings and view chat transcripts on services in reviewer role

With this privilege granted, the user may listen to call recordings and view chat transcripts of the services to which the user is assigned as a reviewer.




Privileges

Registered users of your Bright Pattern Contact Center solution are assigned privileges that can be used to control access to various contact center functions. Privileges are arranged in the same way as they appear on the Roles page of the Contact Center Administrator application. For general information about privileges and roles, see section Roles.

Note: Any supervisors using these privileges will apply toward your contact center's use license limit (i.e., the number of allowed supervisors).

Privileges are organized into seven categories (i.e., groups):

Note: Some service configuration changes that affect agent behavior are not picked up dynamically by Agent Desktop. Thus, after making a change to privileges, we recommend that all affected agents re-login to Agent Desktop.

Interaction Handling group

Access full-screen Agent Desktop

The Access full-screen Agent Desktop privilege allows the user to enable full-screen Agent Desktop view within CRM applications.

Because CRM systems typically have their own email and case management capabilities, the full-screen mode normally would be used by supervisors only.

Delete contacts

The Delete contacts privilege allows the deletion of contacts. If enabled, users can delete individual contacts via the Agent Desktop. When a contact is deleted, its activity history is deleted too. Cases are not deleted automatically.

Edit contacts

The Edit contacts privilege provides write access to contacts. If enabled, users can create new contacts, and users can modify any fields in existing contacts (but not activity history).

Force pop-out phone window

The Force pop-out phone window privilege allows the user to open Agent Desktop in a pop-out window. For more information, see section Understanding Screen-Pop of the Agent Guide.

Enabling this privilege is generally not recommended if you plan to deliver activity forms and/or other web content to agents via screen pop.

Note that if the user has any privileges in the Supervision group (see below), the user will not be able to open Agent Desktop in a pop-out window even if the user has this privilege.

Handle automatically distributed interactions

The Handle automatically distributed interactions allows the user to receive calls from a service queue and preview records. This is the basic privilege that allows the user to perform typical call center agent work (i.e., provide services over the phone and participate in outbound campaigns).

The ability to handle customer chat or email interactions is controlled via separate privileges (see Handle email and cases and Handle service chat).

Handle email and cases

When enabled, the Handle email and cases' privilege allows users to handle email interactions with customers as well as create and process customer cases, which may include interactions of any media type.

Handle leads

Reserved.

Handle service chats

With the Handle service chats privilege, the user may handle chat interactions with customers. This includes chat interactions started by customers via SMS.

Note that the ability to initiate a chat with a customer via SMS is controlled by a separate privilege (see Initiate SMS conversation). Likewise, the ability to use internal chat is controlled by a separate privilege (see Send internal chats).

Initiate SMS conversation

The Initiate SMS conversation privilege allows the user to initiate chats with customers via SMS.

Listen to call recordings and view chat transcripts on assigned services

With this privilege granted, the user may review call recordings and chat transcripts of the services that the user is qualified to handle (i.e., has corresponding service skills).

Listening to own call recordings and view own chat transcripts

This privilege provides Agent Desktop users the capability, via activity history, to access recordings where the agent participated (at least partially). This privilege applies to Agent Desktop only.

Login to Agent Desktop

Login to Agent Desktop allows the user to log in to Agent Desktop application and perform basic back-office telephony functions. Any user who needs access to Agent Desktop must have this privilege. Note that this privilege alone is not sufficient for performing typical contact center agent work.

Note that any user who logs into Agent Desktop will be counted as a concurrent user for the duration of the login session. Your service provider may impose a limit on how many of your users may be logged on concurrently.

Make external calls

A user with the Make external calls privilege may make external calls and blind transfers to external destinations from the Agent Desktop application. If the user does not have this privilege, an attempt to make an external call or blind transfer will result in a text error message displayed on Agent Desktop.

Note that the absence of this privilege does not prevent users from making external calls using the dial pad of their hardphones.

Mask interaction content

The Mask interaction content privilege allows the user to mask fragments of original customer email text, chat text, and images. For more information, see section How to Mask Sensitive Data of the Agent Guide. Note that prior to Bright Pattern Contact Center version 5.10.0 this setting was previously known as Mask original email content.

Modify own identification data

The Modify own identification data privilege allows the user to be able to modify specific fields of the user profile. If the privilege is not present, the following fields are locked:

See other agents/teams in directory

This privilege lets the user see all configured teams and team members in the Agent Desktop directory and view their current availability (presence). For more information, see section How to Use the Directory of the Agent Guide.

See other agents’ cases

See other agents’ cases allows the user to see cases handled by other agents. If the user does not have this privilege, the user will be able to see only cases that with which the user has worked. This privilege affects case search only. Absence of this privilege does not affect the user’s ability to receive emails related to existing cases that the user has not worked on.

Send internal chats

The Send internal chats privilege allows the user to initiate internal chat conversations.

Start recording of interactions

With this privilege, the user may start call recording.

Stop recording of interactions

Stop recording of interactions allows the user to stop call recording.

Transfer calls

The Transfer calls privilege allows the user to transfer customer interactions to consultation parties and host conferences (both via-consultation and single-step).

Absence of this privilege does not affect user’s ability to

Transfer cases

The Transfer cases privilege allows the user to transfer cases. When enabled, the Handle email and cases privilege allows users to handle email interactions with customers as well as create and process customer cases, which may include interactions of any media type.

Use Calendar

The Use Calendar privilege enables users to use the Agent Desktop calendar for scheduling.

Use Favorites tab

Use Favorites tab is an agent-level privilege that controls whether the user can see and set favorites from the Agent Desktop application. This privilege is an agent behavior control to prevent users from dialing destinations that they should not based on FCC/TCPA and organizational rules.

Use Recent Calls tab

The Use Recent Calls tab privilege lets the user restrict access to recent calls. This privilege uses TCPA manual dialing to limit which agents can access recent calls.

Use RightNow

Use RightNow allows the user to use Agent Desktop embedded into the Oracle Service Cloud application (formerly called RightNow). This privilege enables access to the Agent Desktop widget within Oracle Service Cloud.

For more information, see the Oracle Service Cloud Integration Guide.

Use ServiceNow

Use ServiceNow allows the user to use Agent Desktop embedded into the ServiceNow application. This privilege enables access to the Agent Desktop widget within ServiceNow.

For more information, see the ServiceNow Integration Guide.

Use Zendesk

With the Use Zendesk privilege, the user may use Agent Desktop embedded into the Zendesk application. This privilege enables access to the Agent Desktop widget within Zendesk. To enable full-screen Agent Desktop view within Zendesk application, the user must also have the Access full Agent Desktop privilege.

For more information, see the Zendesk Integration Guide.

View content of all emails

When enabled, View content of all emails allows users to view the contents of all email interactions, including those not associated with the services they are skilled to handle.

Bright Pattern Contact Center versions 5.9.0 and later will grant this privilege to all existing roles by default except those that have the BPO Reviewer privilege Listening to call recordings and view chat transcripts on services in reviewer role. This applies to the roles of:


Note that the behavior associated with this privilege was the default system behavior before version 5.9.0.

View content of emails on assigned services

When enabled, View content of emails on assigned services allows users to view the contents of email interactions associated only with the services they are skilled to handle (i.e., not all emails).

Within the Agent Desktop application, these viewing restrictions will be applied to all views where email content may appear. The general principles are that unauthorized agents:


For all case preview panes, these principles are implemented as follows:


For email draft view or case detail view, these principles are implemented as follows:


For a contact’s Activities detail pane, these principles are implemented as follows:

Quality Management

Accept/dispute evaluations of their interactions by others

Accept/dispute evaluations of their interactions by others allows the user to accept or dispute a quality management evaluation of herself.

Assign evaluations and calibrations

Assign evaluations and calibrations allows the user to assign quality management evaluations and calibrations to other users.

Confirm evaluations of supervised agents

Confirm evaluations of supervised agents allows the user to accept or dispute quality management evaluations of users with the Supervisor role.

Delete evals completed by anyone

Delete evals completed by anyone allows the user to delete evaluations of agents in the user's assigned team unless the privilege Manage evaluations across teams is enabled for the same user.

Delete evals completed by themselves

Delete evals completed by themselves allows the user to delete quality management evaluations completed by himself.

Edit evaluation forms

Edit evaluation forms allows the user to edit quality management evaluation forms in the Evaluation Form Editor application. Note that if a form is assigned to a service or campaign, to edit it, one needs either the Manage all services and campaigns privilege or the Manage assigned services and campaigns privilege to edit that service.

Edit public interaction searches

Edit public interaction searches allows the user to edit the public searches seen in the Agent Desktop application, section Quality Management > Eval Home.

Evaluate agent interactions

Evaluate agent interactions allows the user to evaluate agent interactions in the Agent Desktop application, section Quality Management when feature Quality Management Pro is on. If feature Quality Management Pro is off this privilege allows the user to grade interactions while monitoring them in real-time via Agent Desktop while reviewing their recordings and transcripts via the Contact Center Administrator application.

Evaluate own interactions

Evaluate own interactions allows users to evaluate their own interactions and is assigned to agents by default; supervisors or evaluators are meant to confirm these evaluations. Note that these evaluations can be confirmed by a user's supervisor or a supervisor assigned to a user's team only.

Manage evaluations across teams

Manage evaluations across teams removes the restriction of only applying actions and accessing the quality management evaluations of the agents in the teams assigned to the user.

See evals of self

See evals of self allows the user to see quality management evaluations of herself as completed by other users.

Security Administration group

Can edit and erase interaction records

This privilege must be assigned to the user account used for retrieval of interaction content and related metadata via the Interaction Content API.


Grant all privileges

Grant all privileges allows the user to grant any privilege, regardless of the user's May grant or revoke settings with respect to specific privileges. This is helpful during product upgrades where new privileges may be introduced.

Manage roles and security settings

With this privilege enabled, the user has full access to the following settings:

Service and Campaign Administration group

Configure reporting settings

With this privilege enabled, the user has full access to the following settings:

Configure system-wide settings

The Configure system-wide settings privilege gives the user full access to all pages of the following menus: Tasks, Call Center Configuration, and Quality Management.

For tasks, note that all users who have the Configure system-wide settings privilege enabled will receive an email notification each time a scheduled task fails.

Control campaign operations

Control campaign operations enables the user to view and control assigned campaigns via Agent Desktop.

A user must have this privilege in order to be available for selection as a service/campaign operator via the Services and Campaigns > Assignments page. In the Agent Desktop application, access will be limited to campaigns where the user is assigned as an operator.

If this privilege is revoked from a user, the user's name will appear in red color in the list of operators of any services/campaigns that the user may have been previously assigned to operate.

Edit knowledge base

The Edit knowledge base privilege gives the user full access to the Knowledge Base via the Contact Center Administrator application. It also allows the user to create articles in the Knowledge Base via the Agent Desktop application.

Note that access to the Knowledge Base via the Agent Desktop application is provided in the context of the services that the user can handle.

Manage leads

Reserved.

Manage all services and campaigns

The Manage all services and campaigns privilege allows the user to configure all existing services campaigns regardless of whether the user is assigned to them as an administrator. Note that in order to assign teams to campaigns, the user must also have the Manage teams privilege.

Another privilege exists to enable the user to access only assigned services campaigns (see below). Note that in order to prevent the user from creating new services and campaigns, both these privileges must be disabled.

Manage assigned services and campaigns

With this privilege, the user has full access to configuration of the services and campaigns that the user is assigned to as an administrator. For more information, see section Services and Campaigns - Assignments Tab.

Note that in order to assign teams to a service/campaign, the user must also have the Manage teams privilege.

Another privilege exists to enable the user to access all configured campaigns regardless of assignment (see above). Note that in order to prevent the user from creating new campaigns, both these privileges must be disabled.

Manage lists

The Manage lists privilege gives the user full access to calling lists and do-not-call (DNC) lists. Absence of this privilege does not affect the user’s ability to associate existing lists with campaigns.

Manage scenarios

The Manage scenarios privilege allows the user to create, view, and edit scenarios. Absence of this privilege does not affect the user’s ability to configure scenario entries and associate such entries with existing scenarios.

Manage skills

With the Manage skills privilege, the user may create and edit existing auxiliary skills and assign skills to agents with specific levels.

Use SMS/MMS API

This privilege must be assigned to the user account used for authentication of SMS/MMS API requests.

Supervision group

All assigned teams combined view

When enabled, this privilege will show, on the supervisor's home screen, the agents from all teams assigned to the logged in supervisor, specifically with the following metrics:

It shows all services that are the teams are assigned to (individual services can be hidden if needed), specifically the following metrics:

Change alert configuration

Users with the Change alert configuration privilege may enable/disable alerts available for some real-time metric displayed via Agent Desktop, change their appearance, and modify threshold values that trigger such alerts.

Note that the ability to set configured alerts as system-wide defaults is controlled via a separate privilege (see Set alerts for real-time metrics system-wide).

If the user does not have this privilege, the Alert Configuration dialog of the Agent Desktop will provide read-only information about the current alert configuration.

Change real-time metric views

The Change real-time metric views privilege allows the user to add metrics to, and remove them from, any real-time metric views of the Agent Desktop application. The user may also change the order in which the metrics appear in the table views.

Absence of this privilege does not affect the user’s ability to add services and campaigns to, and remove them from, real-time metric views.

Note that the ability to set created real-time metric views as system-wide defaults is controlled via a separate privilege (see Set real-time metric views system-wide).

Define/View subteams of selected agents

The privilege Define/View subteams of selected agents enables subteam controls to be displayed in Agent Desktop and the Reports portal. In addition, the privilege allows users to switch between them. Subteams are smaller groups of agents that supervisors have selected from full teams.

Force agent states

The Force agent states privilege allows the user to change current agent states of members of any team that the user is assigned to supervise.

Monitor agent screen

When enabled, the Monitor agent screen privilege allows the user to view and monitor the screens of a selected agent that the user is assigned to supervise.

Monitor interactions

The Monitor interactions privilege allows the user to connect to calls handled by agents that the user is assigned to supervise in silent monitoring, coaching, and barge-in modes. For more information, see section Call Monitoring, Coaching and Barge-In of the Supervisor Guide.

Set alerts for real-time metrics system-wide

This privilege allows the user to set alerts that the user configures as system-wide defaults. Note that in order to use this privilege, the user must also have privilege Change alert configuration.

Set real-time metric views system wide

Set real-time metric views system wide allows the user to set real-time metric views that the user configures as system-wide defaults. Note that in order to use this privilege, the user must also have the privilege Change real-time metric views.

For more information, see section Customization of Metric Views of the Supervisor Guide.

View real-time agent metrics

View real-time agent metrics allows the user to view real-time metrics for the agents of the teams that the user is assigned to supervise.

View real-time service metrics

With View real-time service metrics, the user may view real-time metrics for all services associated with the teams that the user is assigned to supervise.

Absence of this privilege does not affect the user’s ability to view campaign-specific metrics. To prevent access to these metrics, use privilege Control campaign operations (see above).

System Administration group

Privileges associated with system administration are described as follows.

Allow recording export API access

This privilege must be assigned to the user account used for retrieval of interaction content and related metadata via the Interaction Content API].

Bulk Export/Import Contacts

When enabled, the privilege Bulk Export/Import Contacts allows the export/import icon on the Agent Desktop Contacts screen to be shown.

Bypass Single Sign-On

Users with this privilege can log in to any Bright Pattern application (e.g., Contact Center Administrator, Agent Desktop, etc.) via a direct authentication method (i.e., with Bright Pattern username and password), even if a corporate-level single sign-on (SSO) is configured for the given contact center.

Reasons for bypassing a single sign-on environment could include the need to provide only short-term access to a specific user (i.e., local, temporary account creation) or as a backup sign-in procedure should the SSO process not function as desired.

Users without the privilege should not be able to log in with their Bright Pattern credentials when SSO is enabled; they should, however, be able to log in when it is disabled. By default, this privilege is enabled only for the pre-defined System Administrator role.

If SSO is configured for a contact center, users with this privilege can bypass single sign-on by using special URLs that take the following form:

https://<tenant.domain.com>/admin/?bypass-sso=1

https://<tenant.domain.com>/agentdesktop/?bypass-sso=1

Configure Contact Forms and fields

The Configure Contact Forms and field privilege allows users to edit contact, activity history, and augmentation and case forms.

Configure directory

The Configure directory privilege allows the user to create and modify external contacts that appear in the Directory of the Agent Desktop application.

Manage BPO Clients

When enabled, the Manage BPO Clients privilege allows users to:

Manage all teams

If granted the Manage all teams privilege, the user may


For more information, see sections Users, Teams, and Skill Levels.

Note that if a user is assigned as a supervisor of a particular team, the absence of this privilege does not affect the user’s ability to change most of the configuration settings of the given team and its current members.

Manage phones

The Manage phones privilege gives the user full access to configuration of softphones, hardphones, access numbers, and scenario entries. Absence of this privilege does not affect the user’s ability to assign phone numbers to users.

Manage users

The Manage users privilege allows the user to create users and change the configuration of existing users within the team he is part of or that he is a supervisor of.

Privileged Access IP Range

The Privileged Access IP Range privilege allows users (e.g., administrators) to be able to log in to the system from any IP address (e.g., a public place such as a coffee shop). Without this privilege, users can only log in from specific IP addresses.

Publish help

Publish help gives the user full access to configuring help screens.

View audit log

With the View audit log privilege, the user can view the audit log.

View usage data

The View usage data privilege allows the user to access to reports about usage of telecom carriers’ resources via Contact Center Administrator > Reports > Usage.

Miscellaneous Management Functions group

Access Real-time Stats API

The Access Real-time Stats API privilege gives the user access to applications that are connected to Bright Pattern Contact Center via the Real-time Stats API; this includes viewing the wallboard application. Note: The availability of data on the Agent Desktop Home Screen is not affected by this privilege, with the exception of the wallboard icon.

Can see contents of email push queues

This privilege allows supervisors of teams with the push distribution method enabled to view push queues. Push queue items appear in team queues when the “All Services with Push Queues” option is selected; however, it is possible to select only one service and see only its queue.

While looking at a push queue, a supervisor can:

Note that this setting is not assigned to any roles by default.

Can update final dispositions

This privilege enables users to update dispositions when final. A final disposition can be updated in the interaction record by clicking the Change Disposition Change-Disposition-Button-53.PNG button. For more, see the Agent Guide.


For more information about interaction records, see section Interaction Records Search and Search Results.

Can use agent seat maps

This privilege is reserved.

Customize Wallboards

The Customize Wallboards privilege allows additional elements to appear on the user's wallboard. These elements include title, selector, flip arrows, and menu. Using these elements, users can customize the look and display of their Agent Desktop wallboard. Using the Wallboard Layout Editor, cards and cells can be added, deleted, scaled, and expanded using mouseovers, click-and-drag, and drag-and-drop movements.

Delete cases

The Delete cases privilege allows the deletion of cases. If enabled, users can delete individual cases via the Agent Desktop. When a case is deleted, all interactions related to a case are deleted.

Download recordings and transcripts

With this privilege, the user may download call/screen recordings, chat transcripts, and email messages from the interaction search and review pages of the Contact Center Administrator application.

Listen to recordings linked to external CRM records

This privilege allows the user to listen to call recordings linked to activity history in the CRM records.

Listening to all call recordings and view all chat transcripts

With Listening to all call recordings and view all chat transcripts, the user may review voice recordings and chat transcripts via the Contact Center Administrator application.

Absence of this privilege does not affect the user’s ability to review screen recordings in the Agent Timeline or email messages in the Interaction Search.

When removing this privilege from a user, make sure this user also does not have the privilege Listen to call recordings and view chat transcripts for assigned services in the BPO Client group (see below).

Manage canned chat responses system-wide

The Manage canned chat responses system-wide privilege allows the user to make canned chat responses available to all other agents of the contact center. For more information, see section How to Create and Edit Canned Chat Responses of the Agent Guide.

Pull screen pop

Pull screen pop allows the user to get snapshots of the Context Information Area of the desktops of agents that the user is assigned to supervise. Note that in order to be able to get a snapshot, the user must be connected to the agent in one of the call monitoring modes. Thus, the user also must have the privilege Monitor interactions (see above).

Push/Pull Global Wallboards

Users with the privilege Push/Pull Global Wallboards can push their personal wallboards to other users and/or teams, as well as pull shared wallboards from a global pool. Note that only global wallboards can be pulled.

View historical reports

The View historical reports privilege allows the user to generate and view reports via the Contact Center Administrator application. Absence of this privilege does not affect the user’s ability to access any of the general reporting settings or be a recipient of emailed scheduled reports.

View interaction records

With this privilege, the user may search for and review interaction records via the Contact Center Administrator application.

Absence of this privilege does not affect the user’s ability to generate and view the Call Detail Report or Email Detail Report. To prevent access to these reports, use privilege View historical reports (see above).

Watch agent screen recordings

The privilege Watch agent screen recordings allows supervisors to search for and view the screen recording sessions of agents on their teams. The screen recordings appear in interaction records in agent timeline searches. If a screen recording is available for the selected agent, and if the privilege is enabled, then the Watch screen recording button is shown to the supervisor.


BPO Client group

Listening to call recordings and view chat transcripts on services in reviewer role

With this privilege granted, the user may listen to call recordings and view chat transcripts of the services to which the user is assigned as a reviewer.




Privileges

Registered users of your Bright Pattern Contact Center solution are assigned privileges that can be used to control access to various contact center functions. Privileges are arranged in the same way as they appear on the Roles page of the Contact Center Administrator application. For general information about privileges and roles, see section Roles.

Note: Any supervisors using these privileges will apply toward your contact center's use license limit (i.e., the number of allowed supervisors).

Privileges are organized into seven categories (i.e., groups):

Note: Some service configuration changes that affect agent behavior are not picked up dynamically by Agent Desktop. Thus, after making a change to privileges, we recommend that all affected agents re-login to Agent Desktop.

Interaction Handling group

Access full-screen Agent Desktop

The Access full-screen Agent Desktop privilege allows the user to enable full-screen Agent Desktop view within CRM applications.

Because CRM systems typically have their own email and case management capabilities, the full-screen mode normally would be used by supervisors only.

Delete contacts

The Delete contacts privilege allows the deletion of contacts. If enabled, users can delete individual contacts via the Agent Desktop. When a contact is deleted, its activity history is deleted too. Cases are not deleted automatically.

Edit contacts

The Edit contacts privilege provides write access to contacts. If enabled, users can create new contacts, and users can modify any fields in existing contacts (but not activity history).

Force pop-out phone window

The Force pop-out phone window privilege allows the user to open Agent Desktop in a pop-out window. For more information, see section Understanding Screen-Pop of the Agent Guide.

Enabling this privilege is generally not recommended if you plan to deliver activity forms and/or other web content to agents via screen pop.

Note that if the user has any privileges in the Supervision group (see below), the user will not be able to open Agent Desktop in a pop-out window even if the user has this privilege.

Handle automatically distributed interactions

The Handle automatically distributed interactions allows the user to receive calls from a service queue and preview records. This is the basic privilege that allows the user to perform typical call center agent work (i.e., provide services over the phone and participate in outbound campaigns).

The ability to handle customer chat or email interactions is controlled via separate privileges (see Handle email and cases and Handle service chat).

Handle email and cases

When enabled, the Handle email and cases' privilege allows users to handle email interactions with customers as well as create and process customer cases, which may include interactions of any media type.

Handle leads

Reserved.

Handle service chats

With the Handle service chats privilege, the user may handle chat interactions with customers. This includes chat interactions started by customers via SMS.

Note that the ability to initiate a chat with a customer via SMS is controlled by a separate privilege (see Initiate SMS conversation). Likewise, the ability to use internal chat is controlled by a separate privilege (see Send internal chats).

Initiate SMS conversation

The Initiate SMS conversation privilege allows the user to initiate chats with customers via SMS.

Listen to call recordings and view chat transcripts on assigned services

With this privilege granted, the user may review call recordings and chat transcripts of the services that the user is qualified to handle (i.e., has corresponding service skills).

Listening to own call recordings and view own chat transcripts

This privilege provides Agent Desktop users the capability, via activity history, to access recordings where the agent participated (at least partially). This privilege applies to Agent Desktop only.

Login to Agent Desktop

Login to Agent Desktop allows the user to log in to Agent Desktop application and perform basic back-office telephony functions. Any user who needs access to Agent Desktop must have this privilege. Note that this privilege alone is not sufficient for performing typical contact center agent work.

Note that any user who logs into Agent Desktop will be counted as a concurrent user for the duration of the login session. Your service provider may impose a limit on how many of your users may be logged on concurrently.

Make external calls

A user with the Make external calls privilege may make external calls and blind transfers to external destinations from the Agent Desktop application. If the user does not have this privilege, an attempt to make an external call or blind transfer will result in a text error message displayed on Agent Desktop.

Note that the absence of this privilege does not prevent users from making external calls using the dial pad of their hardphones.

Mask interaction content

The Mask interaction content privilege allows the user to mask fragments of original customer email text, chat text, and images. For more information, see section How to Mask Sensitive Data of the Agent Guide. Note that prior to Bright Pattern Contact Center version 5.10.0 this setting was previously known as Mask original email content.

Modify own identification data

The Modify own identification data privilege allows the user to be able to modify specific fields of the user profile. If the privilege is not present, the following fields are locked:

See other agents/teams in directory

This privilege lets the user see all configured teams and team members in the Agent Desktop directory and view their current availability (presence). For more information, see section How to Use the Directory of the Agent Guide.

See other agents’ cases

See other agents’ cases allows the user to see cases handled by other agents. If the user does not have this privilege, the user will be able to see only cases that with which the user has worked. This privilege affects case search only. Absence of this privilege does not affect the user’s ability to receive emails related to existing cases that the user has not worked on.

Send internal chats

The Send internal chats privilege allows the user to initiate internal chat conversations.

Start recording of interactions

With this privilege, the user may start call recording.

Stop recording of interactions

Stop recording of interactions allows the user to stop call recording.

Transfer calls

The Transfer calls privilege allows the user to transfer customer interactions to consultation parties and host conferences (both via-consultation and single-step).

Absence of this privilege does not affect user’s ability to

Transfer cases

The Transfer cases privilege allows the user to transfer cases. When enabled, the Handle email and cases privilege allows users to handle email interactions with customers as well as create and process customer cases, which may include interactions of any media type.

Use Calendar

The Use Calendar privilege enables users to use the Agent Desktop calendar for scheduling.

Use Favorites tab

Use Favorites tab is an agent-level privilege that controls whether the user can see and set favorites from the Agent Desktop application. This privilege is an agent behavior control to prevent users from dialing destinations that they should not based on FCC/TCPA and organizational rules.

Use Recent Calls tab

The Use Recent Calls tab privilege lets the user restrict access to recent calls. This privilege uses TCPA manual dialing to limit which agents can access recent calls.

Use RightNow

Use RightNow allows the user to use Agent Desktop embedded into the Oracle Service Cloud application (formerly called RightNow). This privilege enables access to the Agent Desktop widget within Oracle Service Cloud.

For more information, see the Oracle Service Cloud Integration Guide.

Use ServiceNow

Use ServiceNow allows the user to use Agent Desktop embedded into the ServiceNow application. This privilege enables access to the Agent Desktop widget within ServiceNow.

For more information, see the ServiceNow Integration Guide.

Use Zendesk

With the Use Zendesk privilege, the user may use Agent Desktop embedded into the Zendesk application. This privilege enables access to the Agent Desktop widget within Zendesk. To enable full-screen Agent Desktop view within Zendesk application, the user must also have the Access full Agent Desktop privilege.

For more information, see the Zendesk Integration Guide.

View content of all emails

When enabled, View content of all emails allows users to view the contents of all email interactions, including those not associated with the services they are skilled to handle.

Bright Pattern Contact Center versions 5.9.0 and later will grant this privilege to all existing roles by default except those that have the BPO Reviewer privilege Listening to call recordings and view chat transcripts on services in reviewer role. This applies to the roles of:


Note that the behavior associated with this privilege was the default system behavior before version 5.9.0.

View content of emails on assigned services

When enabled, View content of emails on assigned services allows users to view the contents of email interactions associated only with the services they are skilled to handle (i.e., not all emails).

Within the Agent Desktop application, these viewing restrictions will be applied to all views where email content may appear. The general principles are that unauthorized agents:


For all case preview panes, these principles are implemented as follows:


For email draft view or case detail view, these principles are implemented as follows:


For a contact’s Activities detail pane, these principles are implemented as follows:

Quality Management

Accept/dispute evaluations of their interactions by others

Accept/dispute evaluations of their interactions by others allows the user to accept or dispute a quality management evaluation of herself.

Assign evaluations and calibrations

Assign evaluations and calibrations allows the user to assign quality management evaluations and calibrations to other users.

Confirm evaluations of supervised agents

Confirm evaluations of supervised agents allows the user to accept or dispute quality management evaluations of users with the Supervisor role.

Delete evals completed by anyone

Delete evals completed by anyone allows the user to delete evaluations of agents in the user's assigned team unless the privilege Manage evaluations across teams is enabled for the same user.

Delete evals completed by themselves

Delete evals completed by themselves allows the user to delete quality management evaluations completed by himself.

Edit evaluation forms

Edit evaluation forms allows the user to edit quality management evaluation forms in the Evaluation Form Editor application. Note that if a form is assigned to a service or campaign, to edit it, one needs either the Manage all services and campaigns privilege or the Manage assigned services and campaigns privilege to edit that service.

Edit public interaction searches

Edit public interaction searches allows the user to edit the public searches seen in the Agent Desktop application, section Quality Management > Eval Home.

Evaluate agent interactions

Evaluate agent interactions allows the user to evaluate agent interactions in the Agent Desktop application, section Quality Management when feature Quality Management Pro is on. If feature Quality Management Pro is off this privilege allows the user to grade interactions while monitoring them in real-time via Agent Desktop while reviewing their recordings and transcripts via the Contact Center Administrator application.

Evaluate own interactions

Evaluate own interactions allows users to evaluate their own interactions and is assigned to agents by default; supervisors or evaluators are meant to confirm these evaluations. Note that these evaluations can be confirmed by a user's supervisor or a supervisor assigned to a user's team only.

Manage evaluations across teams

Manage evaluations across teams removes the restriction of only applying actions and accessing the quality management evaluations of the agents in the teams assigned to the user.

See evals of self

See evals of self allows the user to see quality management evaluations of herself as completed by other users.

Security Administration group

Can edit and erase interaction records

This privilege must be assigned to the user account used for retrieval of interaction content and related metadata via the Interaction Content API.


Grant all privileges

Grant all privileges allows the user to grant any privilege, regardless of the user's May grant or revoke settings with respect to specific privileges. This is helpful during product upgrades where new privileges may be introduced.

Manage roles and security settings

With this privilege enabled, the user has full access to the following settings:

Service and Campaign Administration group

Configure reporting settings

With this privilege enabled, the user has full access to the following settings:

Configure system-wide settings

The Configure system-wide settings privilege gives the user full access to all pages of the following menus: Tasks, Call Center Configuration, and Quality Management.

For tasks, note that all users who have the Configure system-wide settings privilege enabled will receive an email notification each time a scheduled task fails.

Control campaign operations

Control campaign operations enables the user to view and control assigned campaigns via Agent Desktop.

A user must have this privilege in order to be available for selection as a service/campaign operator via the Services and Campaigns > Assignments page. In the Agent Desktop application, access will be limited to campaigns where the user is assigned as an operator.

If this privilege is revoked from a user, the user's name will appear in red color in the list of operators of any services/campaigns that the user may have been previously assigned to operate.

Edit knowledge base

The Edit knowledge base privilege gives the user full access to the Knowledge Base via the Contact Center Administrator application. It also allows the user to create articles in the Knowledge Base via the Agent Desktop application.

Note that access to the Knowledge Base via the Agent Desktop application is provided in the context of the services that the user can handle.

Manage leads

Reserved.

Manage all services and campaigns

The Manage all services and campaigns privilege allows the user to configure all existing services campaigns regardless of whether the user is assigned to them as an administrator. Note that in order to assign teams to campaigns, the user must also have the Manage teams privilege.

Another privilege exists to enable the user to access only assigned services campaigns (see below). Note that in order to prevent the user from creating new services and campaigns, both these privileges must be disabled.

Manage assigned services and campaigns

With this privilege, the user has full access to configuration of the services and campaigns that the user is assigned to as an administrator. For more information, see section Services and Campaigns - Assignments Tab.

Note that in order to assign teams to a service/campaign, the user must also have the Manage teams privilege.

Another privilege exists to enable the user to access all configured campaigns regardless of assignment (see above). Note that in order to prevent the user from creating new campaigns, both these privileges must be disabled.

Manage lists

The Manage lists privilege gives the user full access to calling lists and do-not-call (DNC) lists. Absence of this privilege does not affect the user’s ability to associate existing lists with campaigns.

Manage scenarios

The Manage scenarios privilege allows the user to create, view, and edit scenarios. Absence of this privilege does not affect the user’s ability to configure scenario entries and associate such entries with existing scenarios.

Manage skills

With the Manage skills privilege, the user may create and edit existing auxiliary skills and assign skills to agents with specific levels.

Use SMS/MMS API

This privilege must be assigned to the user account used for authentication of SMS/MMS API requests.

Supervision group

All assigned teams combined view

When enabled, this privilege will show, on the supervisor's home screen, the agents from all teams assigned to the logged in supervisor, specifically with the following metrics:

It shows all services that are the teams are assigned to (individual services can be hidden if needed), specifically the following metrics:

Change alert configuration

Users with the Change alert configuration privilege may enable/disable alerts available for some real-time metric displayed via Agent Desktop, change their appearance, and modify threshold values that trigger such alerts.

Note that the ability to set configured alerts as system-wide defaults is controlled via a separate privilege (see Set alerts for real-time metrics system-wide).

If the user does not have this privilege, the Alert Configuration dialog of the Agent Desktop will provide read-only information about the current alert configuration.

Change real-time metric views

The Change real-time metric views privilege allows the user to add metrics to, and remove them from, any real-time metric views of the Agent Desktop application. The user may also change the order in which the metrics appear in the table views.

Absence of this privilege does not affect the user’s ability to add services and campaigns to, and remove them from, real-time metric views.

Note that the ability to set created real-time metric views as system-wide defaults is controlled via a separate privilege (see Set real-time metric views system-wide).

Define/View subteams of selected agents

The privilege Define/View subteams of selected agents enables subteam controls to be displayed in Agent Desktop and the Reports portal. In addition, the privilege allows users to switch between them. Subteams are smaller groups of agents that supervisors have selected from full teams.

Force agent states

The Force agent states privilege allows the user to change current agent states of members of any team that the user is assigned to supervise.

Monitor agent screen

When enabled, the Monitor agent screen privilege allows the user to view and monitor the screens of a selected agent that the user is assigned to supervise.

Monitor interactions

The Monitor interactions privilege allows the user to connect to calls handled by agents that the user is assigned to supervise in silent monitoring, coaching, and barge-in modes. For more information, see section Call Monitoring, Coaching and Barge-In of the Supervisor Guide.

Set alerts for real-time metrics system-wide

This privilege allows the user to set alerts that the user configures as system-wide defaults. Note that in order to use this privilege, the user must also have privilege Change alert configuration.

Set real-time metric views system wide

Set real-time metric views system wide allows the user to set real-time metric views that the user configures as system-wide defaults. Note that in order to use this privilege, the user must also have the privilege Change real-time metric views.

For more information, see section Customization of Metric Views of the Supervisor Guide.

View real-time agent metrics

View real-time agent metrics allows the user to view real-time metrics for the agents of the teams that the user is assigned to supervise.

View real-time service metrics

With View real-time service metrics, the user may view real-time metrics for all services associated with the teams that the user is assigned to supervise.

Absence of this privilege does not affect the user’s ability to view campaign-specific metrics. To prevent access to these metrics, use privilege Control campaign operations (see above).

System Administration group

Privileges associated with system administration are described as follows.

Allow recording export API access

This privilege must be assigned to the user account used for retrieval of interaction content and related metadata via the Interaction Content API].

Bulk Export/Import Contacts

When enabled, the privilege Bulk Export/Import Contacts allows the export/import icon on the Agent Desktop Contacts screen to be shown.

Bypass Single Sign-On

Users with this privilege can log in to any Bright Pattern application (e.g., Contact Center Administrator, Agent Desktop, etc.) via a direct authentication method (i.e., with Bright Pattern username and password), even if a corporate-level single sign-on (SSO) is configured for the given contact center.

Reasons for bypassing a single sign-on environment could include the need to provide only short-term access to a specific user (i.e., local, temporary account creation) or as a backup sign-in procedure should the SSO process not function as desired.

Users without the privilege should not be able to log in with their Bright Pattern credentials when SSO is enabled; they should, however, be able to log in when it is disabled. By default, this privilege is enabled only for the pre-defined System Administrator role.

If SSO is configured for a contact center, users with this privilege can bypass single sign-on by using special URLs that take the following form:

https://<tenant.domain.com>/admin/?bypass-sso=1

https://<tenant.domain.com>/agentdesktop/?bypass-sso=1

Configure Contact Forms and fields

The Configure Contact Forms and field privilege allows users to edit contact, activity history, and augmentation and case forms.

Configure directory

The Configure directory privilege allows the user to create and modify external contacts that appear in the Directory of the Agent Desktop application.

Manage BPO Clients

When enabled, the Manage BPO Clients privilege allows users to:

Manage all teams

If granted the Manage all teams privilege, the user may


For more information, see sections Users, Teams, and Skill Levels.

Note that if a user is assigned as a supervisor of a particular team, the absence of this privilege does not affect the user’s ability to change most of the configuration settings of the given team and its current members.

Manage phones

The Manage phones privilege gives the user full access to configuration of softphones, hardphones, access numbers, and scenario entries. Absence of this privilege does not affect the user’s ability to assign phone numbers to users.

Manage users

The Manage users privilege allows the user to create users and change the configuration of existing users within the team he is part of or that he is a supervisor of.

Privileged Access IP Range

The Privileged Access IP Range privilege allows users (e.g., administrators) to be able to log in to the system from any IP address (e.g., a public place such as a coffee shop). Without this privilege, users can only log in from specific IP addresses.

Publish help

Publish help gives the user full access to configuring help screens.

View audit log

With the View audit log privilege, the user can view the audit log.

View usage data

The View usage data privilege allows the user to access to reports about usage of telecom carriers’ resources via Contact Center Administrator > Reports > Usage.

Miscellaneous Management Functions group

Access Real-time Stats API

The Access Real-time Stats API privilege gives the user access to applications that are connected to Bright Pattern Contact Center via the Real-time Stats API; this includes viewing the wallboard application. Note: The availability of data on the Agent Desktop Home Screen is not affected by this privilege, with the exception of the wallboard icon.

Can see contents of email push queues

This privilege allows supervisors of teams with the push distribution method enabled to view push queues. Push queue items appear in team queues when the “All Services with Push Queues” option is selected; however, it is possible to select only one service and see only its queue.

While looking at a push queue, a supervisor can:

Note that this setting is not assigned to any roles by default.

Can update final dispositions

This privilege enables users to update dispositions when final. A final disposition can be updated in the interaction record by clicking the Change Disposition Change-Disposition-Button-53.PNG button. For more, see the Agent Guide.


For more information about interaction records, see section Interaction Records Search and Search Results.

Can use agent seat maps

This privilege is reserved.

Customize Wallboards

The Customize Wallboards privilege allows additional elements to appear on the user's wallboard. These elements include title, selector, flip arrows, and menu. Using these elements, users can customize the look and display of their Agent Desktop wallboard. Using the Wallboard Layout Editor, cards and cells can be added, deleted, scaled, and expanded using mouseovers, click-and-drag, and drag-and-drop movements.

Delete cases

The Delete cases privilege allows the deletion of cases. If enabled, users can delete individual cases via the Agent Desktop. When a case is deleted, all interactions related to a case are deleted.

Download recordings and transcripts

With this privilege, the user may download call/screen recordings, chat transcripts, and email messages from the interaction search and review pages of the Contact Center Administrator application.

Listen to recordings linked to external CRM records

This privilege allows the user to listen to call recordings linked to activity history in the CRM records.

Listening to all call recordings and view all chat transcripts

With Listening to all call recordings and view all chat transcripts, the user may review voice recordings and chat transcripts via the Contact Center Administrator application.

Absence of this privilege does not affect the user’s ability to review screen recordings in the Agent Timeline or email messages in the Interaction Search.

When removing this privilege from a user, make sure this user also does not have the privilege Listen to call recordings and view chat transcripts for assigned services in the BPO Client group (see below).

Manage canned chat responses system-wide

The Manage canned chat responses system-wide privilege allows the user to make canned chat responses available to all other agents of the contact center. For more information, see section How to Create and Edit Canned Chat Responses of the Agent Guide.

Pull screen pop

Pull screen pop allows the user to get snapshots of the Context Information Area of the desktops of agents that the user is assigned to supervise. Note that in order to be able to get a snapshot, the user must be connected to the agent in one of the call monitoring modes. Thus, the user also must have the privilege Monitor interactions (see above).

Push/Pull Global Wallboards

Users with the privilege Push/Pull Global Wallboards can push their personal wallboards to other users and/or teams, as well as pull shared wallboards from a global pool. Note that only global wallboards can be pulled.

View historical reports

The View historical reports privilege allows the user to generate and view reports via the Contact Center Administrator application. Absence of this privilege does not affect the user’s ability to access any of the general reporting settings or be a recipient of emailed scheduled reports.

View interaction records

With this privilege, the user may search for and review interaction records via the Contact Center Administrator application.

Absence of this privilege does not affect the user’s ability to generate and view the Call Detail Report or Email Detail Report. To prevent access to these reports, use privilege View historical reports (see above).

Watch agent screen recordings

The privilege Watch agent screen recordings allows supervisors to search for and view the screen recording sessions of agents on their teams. The screen recordings appear in interaction records in agent timeline searches. If a screen recording is available for the selected agent, and if the privilege is enabled, then the Watch screen recording button is shown to the supervisor.


BPO Client group

Listening to call recordings and view chat transcripts on services in reviewer role

With this privilege granted, the user may listen to call recordings and view chat transcripts of the services to which the user is assigned as a reviewer.




Privileges

Registered users of your Bright Pattern Contact Center solution are assigned privileges that can be used to control access to various contact center functions. Privileges are arranged in the same way as they appear on the Roles page of the Contact Center Administrator application. For general information about privileges and roles, see section Roles.

Note: Any supervisors using these privileges will apply toward your contact center's use license limit (i.e., the number of allowed supervisors).

Privileges are organized into seven categories (i.e., groups):

Note: Some service configuration changes that affect agent behavior are not picked up dynamically by Agent Desktop. Thus, after making a change to privileges, we recommend that all affected agents re-login to Agent Desktop.

Interaction Handling group

Access full-screen Agent Desktop

The Access full-screen Agent Desktop privilege allows the user to enable full-screen Agent Desktop view within CRM applications.

Because CRM systems typically have their own email and case management capabilities, the full-screen mode normally would be used by supervisors only.

Delete contacts

The Delete contacts privilege allows the deletion of contacts. If enabled, users can delete individual contacts via the Agent Desktop. When a contact is deleted, its activity history is deleted too. Cases are not deleted automatically.

Edit contacts

The Edit contacts privilege provides write access to contacts. If enabled, users can create new contacts, and users can modify any fields in existing contacts (but not activity history).

Force pop-out phone window

The Force pop-out phone window privilege allows the user to open Agent Desktop in a pop-out window. For more information, see section Understanding Screen-Pop of the Agent Guide.

Enabling this privilege is generally not recommended if you plan to deliver activity forms and/or other web content to agents via screen pop.

Note that if the user has any privileges in the Supervision group (see below), the user will not be able to open Agent Desktop in a pop-out window even if the user has this privilege.

Handle automatically distributed interactions

The Handle automatically distributed interactions allows the user to receive calls from a service queue and preview records. This is the basic privilege that allows the user to perform typical call center agent work (i.e., provide services over the phone and participate in outbound campaigns).

The ability to handle customer chat or email interactions is controlled via separate privileges (see Handle email and cases and Handle service chat).

Handle email and cases

When enabled, the Handle email and cases' privilege allows users to handle email interactions with customers as well as create and process customer cases, which may include interactions of any media type.

Handle leads

Reserved.

Handle service chats

With the Handle service chats privilege, the user may handle chat interactions with customers. This includes chat interactions started by customers via SMS.

Note that the ability to initiate a chat with a customer via SMS is controlled by a separate privilege (see Initiate SMS conversation). Likewise, the ability to use internal chat is controlled by a separate privilege (see Send internal chats).

Initiate SMS conversation

The Initiate SMS conversation privilege allows the user to initiate chats with customers via SMS.

Listen to call recordings and view chat transcripts on assigned services

With this privilege granted, the user may review call recordings and chat transcripts of the services that the user is qualified to handle (i.e., has corresponding service skills).

Listening to own call recordings and view own chat transcripts

This privilege provides Agent Desktop users the capability, via activity history, to access recordings where the agent participated (at least partially). This privilege applies to Agent Desktop only.

Login to Agent Desktop

Login to Agent Desktop allows the user to log in to Agent Desktop application and perform basic back-office telephony functions. Any user who needs access to Agent Desktop must have this privilege. Note that this privilege alone is not sufficient for performing typical contact center agent work.

Note that any user who logs into Agent Desktop will be counted as a concurrent user for the duration of the login session. Your service provider may impose a limit on how many of your users may be logged on concurrently.

Make external calls

A user with the Make external calls privilege may make external calls and blind transfers to external destinations from the Agent Desktop application. If the user does not have this privilege, an attempt to make an external call or blind transfer will result in a text error message displayed on Agent Desktop.

Note that the absence of this privilege does not prevent users from making external calls using the dial pad of their hardphones.

Mask interaction content

The Mask interaction content privilege allows the user to mask fragments of original customer email text, chat text, and images. For more information, see section How to Mask Sensitive Data of the Agent Guide. Note that prior to Bright Pattern Contact Center version 5.10.0 this setting was previously known as Mask original email content.

Modify own identification data

The Modify own identification data privilege allows the user to be able to modify specific fields of the user profile. If the privilege is not present, the following fields are locked:

See other agents/teams in directory

This privilege lets the user see all configured teams and team members in the Agent Desktop directory and view their current availability (presence). For more information, see section How to Use the Directory of the Agent Guide.

See other agents’ cases

See other agents’ cases allows the user to see cases handled by other agents. If the user does not have this privilege, the user will be able to see only cases that with which the user has worked. This privilege affects case search only. Absence of this privilege does not affect the user’s ability to receive emails related to existing cases that the user has not worked on.

Send internal chats

The Send internal chats privilege allows the user to initiate internal chat conversations.

Start recording of interactions

With this privilege, the user may start call recording.

Stop recording of interactions

Stop recording of interactions allows the user to stop call recording.

Transfer calls

The Transfer calls privilege allows the user to transfer customer interactions to consultation parties and host conferences (both via-consultation and single-step).

Absence of this privilege does not affect user’s ability to

Transfer cases

The Transfer cases privilege allows the user to transfer cases. When enabled, the Handle email and cases privilege allows users to handle email interactions with customers as well as create and process customer cases, which may include interactions of any media type.

Use Calendar

The Use Calendar privilege enables users to use the Agent Desktop calendar for scheduling.

Use Favorites tab

Use Favorites tab is an agent-level privilege that controls whether the user can see and set favorites from the Agent Desktop application. This privilege is an agent behavior control to prevent users from dialing destinations that they should not based on FCC/TCPA and organizational rules.

Use Recent Calls tab

The Use Recent Calls tab privilege lets the user restrict access to recent calls. This privilege uses TCPA manual dialing to limit which agents can access recent calls.

Use RightNow

Use RightNow allows the user to use Agent Desktop embedded into the Oracle Service Cloud application (formerly called RightNow). This privilege enables access to the Agent Desktop widget within Oracle Service Cloud.

For more information, see the Oracle Service Cloud Integration Guide.

Use ServiceNow

Use ServiceNow allows the user to use Agent Desktop embedded into the ServiceNow application. This privilege enables access to the Agent Desktop widget within ServiceNow.

For more information, see the ServiceNow Integration Guide.

Use Zendesk

With the Use Zendesk privilege, the user may use Agent Desktop embedded into the Zendesk application. This privilege enables access to the Agent Desktop widget within Zendesk. To enable full-screen Agent Desktop view within Zendesk application, the user must also have the Access full Agent Desktop privilege.

For more information, see the Zendesk Integration Guide.

View content of all emails

When enabled, View content of all emails allows users to view the contents of all email interactions, including those not associated with the services they are skilled to handle.

Bright Pattern Contact Center versions 5.9.0 and later will grant this privilege to all existing roles by default except those that have the BPO Reviewer privilege Listening to call recordings and view chat transcripts on services in reviewer role. This applies to the roles of:


Note that the behavior associated with this privilege was the default system behavior before version 5.9.0.

View content of emails on assigned services

When enabled, View content of emails on assigned services allows users to view the contents of email interactions associated only with the services they are skilled to handle (i.e., not all emails).

Within the Agent Desktop application, these viewing restrictions will be applied to all views where email content may appear. The general principles are that unauthorized agents:


For all case preview panes, these principles are implemented as follows:


For email draft view or case detail view, these principles are implemented as follows:


For a contact’s Activities detail pane, these principles are implemented as follows:

Quality Management

Accept/dispute evaluations of their interactions by others

Accept/dispute evaluations of their interactions by others allows the user to accept or dispute a quality management evaluation of herself.

Assign evaluations and calibrations

Assign evaluations and calibrations allows the user to assign quality management evaluations and calibrations to other users.

Confirm evaluations of supervised agents

Confirm evaluations of supervised agents allows the user to accept or dispute quality management evaluations of users with the Supervisor role.

Delete evals completed by anyone

Delete evals completed by anyone allows the user to delete evaluations of agents in the user's assigned team unless the privilege Manage evaluations across teams is enabled for the same user.

Delete evals completed by themselves

Delete evals completed by themselves allows the user to delete quality management evaluations completed by himself.

Edit evaluation forms

Edit evaluation forms allows the user to edit quality management evaluation forms in the Evaluation Form Editor application. Note that if a form is assigned to a service or campaign, to edit it, one needs either the Manage all services and campaigns privilege or the Manage assigned services and campaigns privilege to edit that service.

Edit public interaction searches

Edit public interaction searches allows the user to edit the public searches seen in the Agent Desktop application, section Quality Management > Eval Home.

Evaluate agent interactions

Evaluate agent interactions allows the user to evaluate agent interactions in the Agent Desktop application, section Quality Management when feature Quality Management Pro is on. If feature Quality Management Pro is off this privilege allows the user to grade interactions while monitoring them in real-time via Agent Desktop while reviewing their recordings and transcripts via the Contact Center Administrator application.

Evaluate own interactions

Evaluate own interactions allows users to evaluate their own interactions and is assigned to agents by default; supervisors or evaluators are meant to confirm these evaluations. Note that these evaluations can be confirmed by a user's supervisor or a supervisor assigned to a user's team only.

Manage evaluations across teams

Manage evaluations across teams removes the restriction of only applying actions and accessing the quality management evaluations of the agents in the teams assigned to the user.

See evals of self

See evals of self allows the user to see quality management evaluations of herself as completed by other users.

Security Administration group

Can edit and erase interaction records

This privilege must be assigned to the user account used for retrieval of interaction content and related metadata via the Interaction Content API.


Grant all privileges

Grant all privileges allows the user to grant any privilege, regardless of the user's May grant or revoke settings with respect to specific privileges. This is helpful during product upgrades where new privileges may be introduced.

Manage roles and security settings

With this privilege enabled, the user has full access to the following settings:

Service and Campaign Administration group

Configure reporting settings

With this privilege enabled, the user has full access to the following settings:

Configure system-wide settings

The Configure system-wide settings privilege gives the user full access to all pages of the following menus: Tasks, Call Center Configuration, and Quality Management.

For tasks, note that all users who have the Configure system-wide settings privilege enabled will receive an email notification each time a scheduled task fails.

Control campaign operations

Control campaign operations enables the user to view and control assigned campaigns via Agent Desktop.

A user must have this privilege in order to be available for selection as a service/campaign operator via the Services and Campaigns > Assignments page. In the Agent Desktop application, access will be limited to campaigns where the user is assigned as an operator.

If this privilege is revoked from a user, the user's name will appear in red color in the list of operators of any services/campaigns that the user may have been previously assigned to operate.

Edit knowledge base

The Edit knowledge base privilege gives the user full access to the Knowledge Base via the Contact Center Administrator application. It also allows the user to create articles in the Knowledge Base via the Agent Desktop application.

Note that access to the Knowledge Base via the Agent Desktop application is provided in the context of the services that the user can handle.

Manage leads

Reserved.

Manage all services and campaigns

The Manage all services and campaigns privilege allows the user to configure all existing services campaigns regardless of whether the user is assigned to them as an administrator. Note that in order to assign teams to campaigns, the user must also have the Manage teams privilege.

Another privilege exists to enable the user to access only assigned services campaigns (see below). Note that in order to prevent the user from creating new services and campaigns, both these privileges must be disabled.

Manage assigned services and campaigns

With this privilege, the user has full access to configuration of the services and campaigns that the user is assigned to as an administrator. For more information, see section Services and Campaigns - Assignments Tab.

Note that in order to assign teams to a service/campaign, the user must also have the Manage teams privilege.

Another privilege exists to enable the user to access all configured campaigns regardless of assignment (see above). Note that in order to prevent the user from creating new campaigns, both these privileges must be disabled.

Manage lists

The Manage lists privilege gives the user full access to calling lists and do-not-call (DNC) lists. Absence of this privilege does not affect the user’s ability to associate existing lists with campaigns.

Manage scenarios

The Manage scenarios privilege allows the user to create, view, and edit scenarios. Absence of this privilege does not affect the user’s ability to configure scenario entries and associate such entries with existing scenarios.

Manage skills

With the Manage skills privilege, the user may create and edit existing auxiliary skills and assign skills to agents with specific levels.

Use SMS/MMS API

This privilege must be assigned to the user account used for authentication of SMS/MMS API requests.

Supervision group

All assigned teams combined view

When enabled, this privilege will show, on the supervisor's home screen, the agents from all teams assigned to the logged in supervisor, specifically with the following metrics:

It shows all services that are the teams are assigned to (individual services can be hidden if needed), specifically the following metrics:

Change alert configuration

Users with the Change alert configuration privilege may enable/disable alerts available for some real-time metric displayed via Agent Desktop, change their appearance, and modify threshold values that trigger such alerts.

Note that the ability to set configured alerts as system-wide defaults is controlled via a separate privilege (see Set alerts for real-time metrics system-wide).

If the user does not have this privilege, the Alert Configuration dialog of the Agent Desktop will provide read-only information about the current alert configuration.

Change real-time metric views

The Change real-time metric views privilege allows the user to add metrics to, and remove them from, any real-time metric views of the Agent Desktop application. The user may also change the order in which the metrics appear in the table views.

Absence of this privilege does not affect the user’s ability to add services and campaigns to, and remove them from, real-time metric views.

Note that the ability to set created real-time metric views as system-wide defaults is controlled via a separate privilege (see Set real-time metric views system-wide).

Define/View subteams of selected agents

The privilege Define/View subteams of selected agents enables subteam controls to be displayed in Agent Desktop and the Reports portal. In addition, the privilege allows users to switch between them. Subteams are smaller groups of agents that supervisors have selected from full teams.

Force agent states

The Force agent states privilege allows the user to change current agent states of members of any team that the user is assigned to supervise.

Monitor agent screen

When enabled, the Monitor agent screen privilege allows the user to view and monitor the screens of a selected agent that the user is assigned to supervise.

Monitor interactions

The Monitor interactions privilege allows the user to connect to calls handled by agents that the user is assigned to supervise in silent monitoring, coaching, and barge-in modes. For more information, see section Call Monitoring, Coaching and Barge-In of the Supervisor Guide.

Set alerts for real-time metrics system-wide

This privilege allows the user to set alerts that the user configures as system-wide defaults. Note that in order to use this privilege, the user must also have privilege Change alert configuration.

Set real-time metric views system wide

Set real-time metric views system wide allows the user to set real-time metric views that the user configures as system-wide defaults. Note that in order to use this privilege, the user must also have the privilege Change real-time metric views.

For more information, see section Customization of Metric Views of the Supervisor Guide.

View real-time agent metrics

View real-time agent metrics allows the user to view real-time metrics for the agents of the teams that the user is assigned to supervise.

View real-time service metrics

With View real-time service metrics, the user may view real-time metrics for all services associated with the teams that the user is assigned to supervise.

Absence of this privilege does not affect the user’s ability to view campaign-specific metrics. To prevent access to these metrics, use privilege Control campaign operations (see above).

System Administration group

Privileges associated with system administration are described as follows.

Allow recording export API access

This privilege must be assigned to the user account used for retrieval of interaction content and related metadata via the Interaction Content API].

Bulk Export/Import Contacts

When enabled, the privilege Bulk Export/Import Contacts allows the export/import icon on the Agent Desktop Contacts screen to be shown.

Bypass Single Sign-On

Users with this privilege can log in to any Bright Pattern application (e.g., Contact Center Administrator, Agent Desktop, etc.) via a direct authentication method (i.e., with Bright Pattern username and password), even if a corporate-level single sign-on (SSO) is configured for the given contact center.

Reasons for bypassing a single sign-on environment could include the need to provide only short-term access to a specific user (i.e., local, temporary account creation) or as a backup sign-in procedure should the SSO process not function as desired.

Users without the privilege should not be able to log in with their Bright Pattern credentials when SSO is enabled; they should, however, be able to log in when it is disabled. By default, this privilege is enabled only for the pre-defined System Administrator role.

If SSO is configured for a contact center, users with this privilege can bypass single sign-on by using special URLs that take the following form:

https://<tenant.domain.com>/admin/?bypass-sso=1

https://<tenant.domain.com>/agentdesktop/?bypass-sso=1

Configure Contact Forms and fields

The Configure Contact Forms and field privilege allows users to edit contact, activity history, and augmentation and case forms.

Configure directory

The Configure directory privilege allows the user to create and modify external contacts that appear in the Directory of the Agent Desktop application.

Manage BPO Clients

When enabled, the Manage BPO Clients privilege allows users to:

Manage all teams

If granted the Manage all teams privilege, the user may


For more information, see sections Users, Teams, and Skill Levels.

Note that if a user is assigned as a supervisor of a particular team, the absence of this privilege does not affect the user’s ability to change most of the configuration settings of the given team and its current members.

Manage phones

The Manage phones privilege gives the user full access to configuration of softphones, hardphones, access numbers, and scenario entries. Absence of this privilege does not affect the user’s ability to assign phone numbers to users.

Manage users

The Manage users privilege allows the user to create users and change the configuration of existing users within the team he is part of or that he is a supervisor of.

Privileged Access IP Range

The Privileged Access IP Range privilege allows users (e.g., administrators) to be able to log in to the system from any IP address (e.g., a public place such as a coffee shop). Without this privilege, users can only log in from specific IP addresses.

Publish help

Publish help gives the user full access to configuring help screens.

View audit log

With the View audit log privilege, the user can view the audit log.

View usage data

The View usage data privilege allows the user to access to reports about usage of telecom carriers’ resources via Contact Center Administrator > Reports > Usage.

Miscellaneous Management Functions group

Access Real-time Stats API

The Access Real-time Stats API privilege gives the user access to applications that are connected to Bright Pattern Contact Center via the Real-time Stats API; this includes viewing the wallboard application. Note: The availability of data on the Agent Desktop Home Screen is not affected by this privilege, with the exception of the wallboard icon.

Can see contents of email push queues

This privilege allows supervisors of teams with the push distribution method enabled to view push queues. Push queue items appear in team queues when the “All Services with Push Queues” option is selected; however, it is possible to select only one service and see only its queue.

While looking at a push queue, a supervisor can:

Note that this setting is not assigned to any roles by default.

Can update final dispositions

This privilege enables users to update dispositions when final. A final disposition can be updated in the interaction record by clicking the Change Disposition Change-Disposition-Button-53.PNG button. For more, see the Agent Guide.


For more information about interaction records, see section Interaction Records Search and Search Results.

Can use agent seat maps

This privilege is reserved.

Customize Wallboards

The Customize Wallboards privilege allows additional elements to appear on the user's wallboard. These elements include title, selector, flip arrows, and menu. Using these elements, users can customize the look and display of their Agent Desktop wallboard. Using the Wallboard Layout Editor, cards and cells can be added, deleted, scaled, and expanded using mouseovers, click-and-drag, and drag-and-drop movements.

Delete cases

The Delete cases privilege allows the deletion of cases. If enabled, users can delete individual cases via the Agent Desktop. When a case is deleted, all interactions related to a case are deleted.

Download recordings and transcripts

With this privilege, the user may download call/screen recordings, chat transcripts, and email messages from the interaction search and review pages of the Contact Center Administrator application.

Listen to recordings linked to external CRM records

This privilege allows the user to listen to call recordings linked to activity history in the CRM records.

Listening to all call recordings and view all chat transcripts

With Listening to all call recordings and view all chat transcripts, the user may review voice recordings and chat transcripts via the Contact Center Administrator application.

Absence of this privilege does not affect the user’s ability to review screen recordings in the Agent Timeline or email messages in the Interaction Search.

When removing this privilege from a user, make sure this user also does not have the privilege Listen to call recordings and view chat transcripts for assigned services in the BPO Client group (see below).

Manage canned chat responses system-wide

The Manage canned chat responses system-wide privilege allows the user to make canned chat responses available to all other agents of the contact center. For more information, see section How to Create and Edit Canned Chat Responses of the Agent Guide.

Pull screen pop

Pull screen pop allows the user to get snapshots of the Context Information Area of the desktops of agents that the user is assigned to supervise. Note that in order to be able to get a snapshot, the user must be connected to the agent in one of the call monitoring modes. Thus, the user also must have the privilege Monitor interactions (see above).

Push/Pull Global Wallboards

Users with the privilege Push/Pull Global Wallboards can push their personal wallboards to other users and/or teams, as well as pull shared wallboards from a global pool. Note that only global wallboards can be pulled.

View historical reports

The View historical reports privilege allows the user to generate and view reports via the Contact Center Administrator application. Absence of this privilege does not affect the user’s ability to access any of the general reporting settings or be a recipient of emailed scheduled reports.

View interaction records

With this privilege, the user may search for and review interaction records via the Contact Center Administrator application.

Absence of this privilege does not affect the user’s ability to generate and view the Call Detail Report or Email Detail Report. To prevent access to these reports, use privilege View historical reports (see above).

Watch agent screen recordings

The privilege Watch agent screen recordings allows supervisors to search for and view the screen recording sessions of agents on their teams. The screen recordings appear in interaction records in agent timeline searches. If a screen recording is available for the selected agent, and if the privilege is enabled, then the Watch screen recording button is shown to the supervisor.


BPO Client group

Listening to call recordings and view chat transcripts on services in reviewer role

With this privilege granted, the user may listen to call recordings and view chat transcripts of the services to which the user is assigned as a reviewer.




Privileges

Registered users of your Bright Pattern Contact Center solution are assigned privileges that can be used to control access to various contact center functions. Privileges are arranged in the same way as they appear on the Roles page of the Contact Center Administrator application. For general information about privileges and roles, see section Roles.

Note: Any supervisors using these privileges will apply toward your contact center's use license limit (i.e., the number of allowed supervisors).

Privileges are organized into seven categories (i.e., groups):

Note: Some service configuration changes that affect agent behavior are not picked up dynamically by Agent Desktop. Thus, after making a change to privileges, we recommend that all affected agents re-login to Agent Desktop.

Interaction Handling group

Access full-screen Agent Desktop

The Access full-screen Agent Desktop privilege allows the user to enable full-screen Agent Desktop view within CRM applications.

Because CRM systems typically have their own email and case management capabilities, the full-screen mode normally would be used by supervisors only.

Delete contacts

The Delete contacts privilege allows the deletion of contacts. If enabled, users can delete individual contacts via the Agent Desktop. When a contact is deleted, its activity history is deleted too. Cases are not deleted automatically.

Edit contacts

The Edit contacts privilege provides write access to contacts. If enabled, users can create new contacts, and users can modify any fields in existing contacts (but not activity history).

Force pop-out phone window

The Force pop-out phone window privilege allows the user to open Agent Desktop in a pop-out window. For more information, see section Understanding Screen-Pop of the Agent Guide.

Enabling this privilege is generally not recommended if you plan to deliver activity forms and/or other web content to agents via screen pop.

Note that if the user has any privileges in the Supervision group (see below), the user will not be able to open Agent Desktop in a pop-out window even if the user has this privilege.

Handle automatically distributed interactions

The Handle automatically distributed interactions allows the user to receive calls from a service queue and preview records. This is the basic privilege that allows the user to perform typical call center agent work (i.e., provide services over the phone and participate in outbound campaigns).

The ability to handle customer chat or email interactions is controlled via separate privileges (see Handle email and cases and Handle service chat).

Handle email and cases

When enabled, the Handle email and cases' privilege allows users to handle email interactions with customers as well as create and process customer cases, which may include interactions of any media type.

Handle leads

Reserved.

Handle service chats

With the Handle service chats privilege, the user may handle chat interactions with customers. This includes chat interactions started by customers via SMS.

Note that the ability to initiate a chat with a customer via SMS is controlled by a separate privilege (see Initiate SMS conversation). Likewise, the ability to use internal chat is controlled by a separate privilege (see Send internal chats).

Initiate SMS conversation

The Initiate SMS conversation privilege allows the user to initiate chats with customers via SMS.

Listen to call recordings and view chat transcripts on assigned services

With this privilege granted, the user may review call recordings and chat transcripts of the services that the user is qualified to handle (i.e., has corresponding service skills).

Listening to own call recordings and view own chat transcripts

This privilege provides Agent Desktop users the capability, via activity history, to access recordings where the agent participated (at least partially). This privilege applies to Agent Desktop only.

Login to Agent Desktop

Login to Agent Desktop allows the user to log in to Agent Desktop application and perform basic back-office telephony functions. Any user who needs access to Agent Desktop must have this privilege. Note that this privilege alone is not sufficient for performing typical contact center agent work.

Note that any user who logs into Agent Desktop will be counted as a concurrent user for the duration of the login session. Your service provider may impose a limit on how many of your users may be logged on concurrently.

Make external calls

A user with the Make external calls privilege may make external calls and blind transfers to external destinations from the Agent Desktop application. If the user does not have this privilege, an attempt to make an external call or blind transfer will result in a text error message displayed on Agent Desktop.

Note that the absence of this privilege does not prevent users from making external calls using the dial pad of their hardphones.

Mask interaction content

The Mask interaction content privilege allows the user to mask fragments of original customer email text, chat text, and images. For more information, see section How to Mask Sensitive Data of the Agent Guide. Note that prior to Bright Pattern Contact Center version 5.10.0 this setting was previously known as Mask original email content.

Modify own identification data

The Modify own identification data privilege allows the user to be able to modify specific fields of the user profile. If the privilege is not present, the following fields are locked:

See other agents/teams in directory

This privilege lets the user see all configured teams and team members in the Agent Desktop directory and view their current availability (presence). For more information, see section How to Use the Directory of the Agent Guide.

See other agents’ cases

See other agents’ cases allows the user to see cases handled by other agents. If the user does not have this privilege, the user will be able to see only cases that with which the user has worked. This privilege affects case search only. Absence of this privilege does not affect the user’s ability to receive emails related to existing cases that the user has not worked on.

Send internal chats

The Send internal chats privilege allows the user to initiate internal chat conversations.

Start recording of interactions

With this privilege, the user may start call recording.

Stop recording of interactions

Stop recording of interactions allows the user to stop call recording.

Transfer calls

The Transfer calls privilege allows the user to transfer customer interactions to consultation parties and host conferences (both via-consultation and single-step).

Absence of this privilege does not affect user’s ability to

Transfer cases

The Transfer cases privilege allows the user to transfer cases. When enabled, the Handle email and cases privilege allows users to handle email interactions with customers as well as create and process customer cases, which may include interactions of any media type.

Use Calendar

The Use Calendar privilege enables users to use the Agent Desktop calendar for scheduling.

Use Favorites tab

Use Favorites tab is an agent-level privilege that controls whether the user can see and set favorites from the Agent Desktop application. This privilege is an agent behavior control to prevent users from dialing destinations that they should not based on FCC/TCPA and organizational rules.

Use Recent Calls tab

The Use Recent Calls tab privilege lets the user restrict access to recent calls. This privilege uses TCPA manual dialing to limit which agents can access recent calls.

Use RightNow

Use RightNow allows the user to use Agent Desktop embedded into the Oracle Service Cloud application (formerly called RightNow). This privilege enables access to the Agent Desktop widget within Oracle Service Cloud.

For more information, see the Oracle Service Cloud Integration Guide.

Use ServiceNow

Use ServiceNow allows the user to use Agent Desktop embedded into the ServiceNow application. This privilege enables access to the Agent Desktop widget within ServiceNow.

For more information, see the ServiceNow Integration Guide.

Use Zendesk

With the Use Zendesk privilege, the user may use Agent Desktop embedded into the Zendesk application. This privilege enables access to the Agent Desktop widget within Zendesk. To enable full-screen Agent Desktop view within Zendesk application, the user must also have the Access full Agent Desktop privilege.

For more information, see the Zendesk Integration Guide.

View content of all emails

When enabled, View content of all emails allows users to view the contents of all email interactions, including those not associated with the services they are skilled to handle.

Bright Pattern Contact Center versions 5.9.0 and later will grant this privilege to all existing roles by default except those that have the BPO Reviewer privilege Listening to call recordings and view chat transcripts on services in reviewer role. This applies to the roles of:


Note that the behavior associated with this privilege was the default system behavior before version 5.9.0.

View content of emails on assigned services

When enabled, View content of emails on assigned services allows users to view the contents of email interactions associated only with the services they are skilled to handle (i.e., not all emails).

Within the Agent Desktop application, these viewing restrictions will be applied to all views where email content may appear. The general principles are that unauthorized agents:


For all case preview panes, these principles are implemented as follows:


For email draft view or case detail view, these principles are implemented as follows:


For a contact’s Activities detail pane, these principles are implemented as follows:

Quality Management

Accept/dispute evaluations of their interactions by others

Accept/dispute evaluations of their interactions by others allows the user to accept or dispute a quality management evaluation of herself.

Assign evaluations and calibrations

Assign evaluations and calibrations allows the user to assign quality management evaluations and calibrations to other users.

Confirm evaluations of supervised agents

Confirm evaluations of supervised agents allows the user to accept or dispute quality management evaluations of users with the Supervisor role.

Delete evals completed by anyone

Delete evals completed by anyone allows the user to delete evaluations of agents in the user's assigned team unless the privilege Manage evaluations across teams is enabled for the same user.

Delete evals completed by themselves

Delete evals completed by themselves allows the user to delete quality management evaluations completed by himself.

Edit evaluation forms

Edit evaluation forms allows the user to edit quality management evaluation forms in the Evaluation Form Editor application. Note that if a form is assigned to a service or campaign, to edit it, one needs either the Manage all services and campaigns privilege or the Manage assigned services and campaigns privilege to edit that service.

Edit public interaction searches

Edit public interaction searches allows the user to edit the public searches seen in the Agent Desktop application, section Quality Management > Eval Home.

Evaluate agent interactions

Evaluate agent interactions allows the user to evaluate agent interactions in the Agent Desktop application, section Quality Management when feature Quality Management Pro is on. If feature Quality Management Pro is off this privilege allows the user to grade interactions while monitoring them in real-time via Agent Desktop while reviewing their recordings and transcripts via the Contact Center Administrator application.

Evaluate own interactions

Evaluate own interactions allows users to evaluate their own interactions and is assigned to agents by default; supervisors or evaluators are meant to confirm these evaluations. Note that these evaluations can be confirmed by a user's supervisor or a supervisor assigned to a user's team only.

Manage evaluations across teams

Manage evaluations across teams removes the restriction of only applying actions and accessing the quality management evaluations of the agents in the teams assigned to the user.

See evals of self

See evals of self allows the user to see quality management evaluations of herself as completed by other users.

Security Administration group

Can edit and erase interaction records

This privilege must be assigned to the user account used for retrieval of interaction content and related metadata via the Interaction Content API.


Grant all privileges

Grant all privileges allows the user to grant any privilege, regardless of the user's May grant or revoke settings with respect to specific privileges. This is helpful during product upgrades where new privileges may be introduced.

Manage roles and security settings

With this privilege enabled, the user has full access to the following settings:

Service and Campaign Administration group

Configure reporting settings

With this privilege enabled, the user has full access to the following settings:

Configure system-wide settings

The Configure system-wide settings privilege gives the user full access to all pages of the following menus: Tasks, Call Center Configuration, and Quality Management.

For tasks, note that all users who have the Configure system-wide settings privilege enabled will receive an email notification each time a scheduled task fails.

Control campaign operations

Control campaign operations enables the user to view and control assigned campaigns via Agent Desktop.

A user must have this privilege in order to be available for selection as a service/campaign operator via the Services and Campaigns > Assignments page. In the Agent Desktop application, access will be limited to campaigns where the user is assigned as an operator.

If this privilege is revoked from a user, the user's name will appear in red color in the list of operators of any services/campaigns that the user may have been previously assigned to operate.

Edit knowledge base

The Edit knowledge base privilege gives the user full access to the Knowledge Base via the Contact Center Administrator application. It also allows the user to create articles in the Knowledge Base via the Agent Desktop application.

Note that access to the Knowledge Base via the Agent Desktop application is provided in the context of the services that the user can handle.

Manage leads

Reserved.

Manage all services and campaigns

The Manage all services and campaigns privilege allows the user to configure all existing services campaigns regardless of whether the user is assigned to them as an administrator. Note that in order to assign teams to campaigns, the user must also have the Manage teams privilege.

Another privilege exists to enable the user to access only assigned services campaigns (see below). Note that in order to prevent the user from creating new services and campaigns, both these privileges must be disabled.

Manage assigned services and campaigns

With this privilege, the user has full access to configuration of the services and campaigns that the user is assigned to as an administrator. For more information, see section Services and Campaigns - Assignments Tab.

Note that in order to assign teams to a service/campaign, the user must also have the Manage teams privilege.

Another privilege exists to enable the user to access all configured campaigns regardless of assignment (see above). Note that in order to prevent the user from creating new campaigns, both these privileges must be disabled.

Manage lists

The Manage lists privilege gives the user full access to calling lists and do-not-call (DNC) lists. Absence of this privilege does not affect the user’s ability to associate existing lists with campaigns.

Manage scenarios

The Manage scenarios privilege allows the user to create, view, and edit scenarios. Absence of this privilege does not affect the user’s ability to configure scenario entries and associate such entries with existing scenarios.

Manage skills

With the Manage skills privilege, the user may create and edit existing auxiliary skills and assign skills to agents with specific levels.

Use SMS/MMS API

This privilege must be assigned to the user account used for authentication of SMS/MMS API requests.

Supervision group

All assigned teams combined view

When enabled, this privilege will show, on the supervisor's home screen, the agents from all teams assigned to the logged in supervisor, specifically with the following metrics:

It shows all services that are the teams are assigned to (individual services can be hidden if needed), specifically the following metrics:

Change alert configuration

Users with the Change alert configuration privilege may enable/disable alerts available for some real-time metric displayed via Agent Desktop, change their appearance, and modify threshold values that trigger such alerts.

Note that the ability to set configured alerts as system-wide defaults is controlled via a separate privilege (see Set alerts for real-time metrics system-wide).

If the user does not have this privilege, the Alert Configuration dialog of the Agent Desktop will provide read-only information about the current alert configuration.

Change real-time metric views

The Change real-time metric views privilege allows the user to add metrics to, and remove them from, any real-time metric views of the Agent Desktop application. The user may also change the order in which the metrics appear in the table views.

Absence of this privilege does not affect the user’s ability to add services and campaigns to, and remove them from, real-time metric views.

Note that the ability to set created real-time metric views as system-wide defaults is controlled via a separate privilege (see Set real-time metric views system-wide).

Define/View subteams of selected agents

The privilege Define/View subteams of selected agents enables subteam controls to be displayed in Agent Desktop and the Reports portal. In addition, the privilege allows users to switch between them. Subteams are smaller groups of agents that supervisors have selected from full teams.

Force agent states

The Force agent states privilege allows the user to change current agent states of members of any team that the user is assigned to supervise.

Monitor agent screen

When enabled, the Monitor agent screen privilege allows the user to view and monitor the screens of a selected agent that the user is assigned to supervise.

Monitor interactions

The Monitor interactions privilege allows the user to connect to calls handled by agents that the user is assigned to supervise in silent monitoring, coaching, and barge-in modes. For more information, see section Call Monitoring, Coaching and Barge-In of the Supervisor Guide.

Set alerts for real-time metrics system-wide

This privilege allows the user to set alerts that the user configures as system-wide defaults. Note that in order to use this privilege, the user must also have privilege Change alert configuration.

Set real-time metric views system wide

Set real-time metric views system wide allows the user to set real-time metric views that the user configures as system-wide defaults. Note that in order to use this privilege, the user must also have the privilege Change real-time metric views.

For more information, see section Customization of Metric Views of the Supervisor Guide.

View real-time agent metrics

View real-time agent metrics allows the user to view real-time metrics for the agents of the teams that the user is assigned to supervise.

View real-time service metrics

With View real-time service metrics, the user may view real-time metrics for all services associated with the teams that the user is assigned to supervise.

Absence of this privilege does not affect the user’s ability to view campaign-specific metrics. To prevent access to these metrics, use privilege Control campaign operations (see above).

System Administration group

Privileges associated with system administration are described as follows.

Allow recording export API access

This privilege must be assigned to the user account used for retrieval of interaction content and related metadata via the Interaction Content API].

Bulk Export/Import Contacts

When enabled, the privilege Bulk Export/Import Contacts allows the export/import icon on the Agent Desktop Contacts screen to be shown.

Bypass Single Sign-On

Users with this privilege can log in to any Bright Pattern application (e.g., Contact Center Administrator, Agent Desktop, etc.) via a direct authentication method (i.e., with Bright Pattern username and password), even if a corporate-level single sign-on (SSO) is configured for the given contact center.

Reasons for bypassing a single sign-on environment could include the need to provide only short-term access to a specific user (i.e., local, temporary account creation) or as a backup sign-in procedure should the SSO process not function as desired.

Users without the privilege should not be able to log in with their Bright Pattern credentials when SSO is enabled; they should, however, be able to log in when it is disabled. By default, this privilege is enabled only for the pre-defined System Administrator role.

If SSO is configured for a contact center, users with this privilege can bypass single sign-on by using special URLs that take the following form:

https://<tenant.domain.com>/admin/?bypass-sso=1

https://<tenant.domain.com>/agentdesktop/?bypass-sso=1

Configure Contact Forms and fields

The Configure Contact Forms and field privilege allows users to edit contact, activity history, and augmentation and case forms.

Configure directory

The Configure directory privilege allows the user to create and modify external contacts that appear in the Directory of the Agent Desktop application.

Manage BPO Clients

When enabled, the Manage BPO Clients privilege allows users to:

Manage all teams

If granted the Manage all teams privilege, the user may


For more information, see sections Users, Teams, and Skill Levels.

Note that if a user is assigned as a supervisor of a particular team, the absence of this privilege does not affect the user’s ability to change most of the configuration settings of the given team and its current members.

Manage phones

The Manage phones privilege gives the user full access to configuration of softphones, hardphones, access numbers, and scenario entries. Absence of this privilege does not affect the user’s ability to assign phone numbers to users.

Manage users

The Manage users privilege allows the user to create users and change the configuration of existing users within the team he is part of or that he is a supervisor of.

Privileged Access IP Range

The Privileged Access IP Range privilege allows users (e.g., administrators) to be able to log in to the system from any IP address (e.g., a public place such as a coffee shop). Without this privilege, users can only log in from specific IP addresses.

Publish help

Publish help gives the user full access to configuring help screens.

View audit log

With the View audit log privilege, the user can view the audit log.

View usage data

The View usage data privilege allows the user to access to reports about usage of telecom carriers’ resources via Contact Center Administrator > Reports > Usage.

Miscellaneous Management Functions group

Access Real-time Stats API

The Access Real-time Stats API privilege gives the user access to applications that are connected to Bright Pattern Contact Center via the Real-time Stats API; this includes viewing the wallboard application. Note: The availability of data on the Agent Desktop Home Screen is not affected by this privilege, with the exception of the wallboard icon.

Can see contents of email push queues

This privilege allows supervisors of teams with the push distribution method enabled to view push queues. Push queue items appear in team queues when the “All Services with Push Queues” option is selected; however, it is possible to select only one service and see only its queue.

While looking at a push queue, a supervisor can:

Note that this setting is not assigned to any roles by default.

Can update final dispositions

This privilege enables users to update dispositions when final. A final disposition can be updated in the interaction record by clicking the Change Disposition Change-Disposition-Button-53.PNG button. For more, see the Agent Guide.


For more information about interaction records, see section Interaction Records Search and Search Results.

Can use agent seat maps

This privilege is reserved.

Customize Wallboards

The Customize Wallboards privilege allows additional elements to appear on the user's wallboard. These elements include title, selector, flip arrows, and menu. Using these elements, users can customize the look and display of their Agent Desktop wallboard. Using the Wallboard Layout Editor, cards and cells can be added, deleted, scaled, and expanded using mouseovers, click-and-drag, and drag-and-drop movements.

Delete cases

The Delete cases privilege allows the deletion of cases. If enabled, users can delete individual cases via the Agent Desktop. When a case is deleted, all interactions related to a case are deleted.

Download recordings and transcripts

With this privilege, the user may download call/screen recordings, chat transcripts, and email messages from the interaction search and review pages of the Contact Center Administrator application.

Listen to recordings linked to external CRM records

This privilege allows the user to listen to call recordings linked to activity history in the CRM records.

Listening to all call recordings and view all chat transcripts

With Listening to all call recordings and view all chat transcripts, the user may review voice recordings and chat transcripts via the Contact Center Administrator application.

Absence of this privilege does not affect the user’s ability to review screen recordings in the Agent Timeline or email messages in the Interaction Search.

When removing this privilege from a user, make sure this user also does not have the privilege Listen to call recordings and view chat transcripts for assigned services in the BPO Client group (see below).

Manage canned chat responses system-wide

The Manage canned chat responses system-wide privilege allows the user to make canned chat responses available to all other agents of the contact center. For more information, see section How to Create and Edit Canned Chat Responses of the Agent Guide.

Pull screen pop

Pull screen pop allows the user to get snapshots of the Context Information Area of the desktops of agents that the user is assigned to supervise. Note that in order to be able to get a snapshot, the user must be connected to the agent in one of the call monitoring modes. Thus, the user also must have the privilege Monitor interactions (see above).

Push/Pull Global Wallboards

Users with the privilege Push/Pull Global Wallboards can push their personal wallboards to other users and/or teams, as well as pull shared wallboards from a global pool. Note that only global wallboards can be pulled.

View historical reports

The View historical reports privilege allows the user to generate and view reports via the Contact Center Administrator application. Absence of this privilege does not affect the user’s ability to access any of the general reporting settings or be a recipient of emailed scheduled reports.

View interaction records

With this privilege, the user may search for and review interaction records via the Contact Center Administrator application.

Absence of this privilege does not affect the user’s ability to generate and view the Call Detail Report or Email Detail Report. To prevent access to these reports, use privilege View historical reports (see above).

Watch agent screen recordings

The privilege Watch agent screen recordings allows supervisors to search for and view the screen recording sessions of agents on their teams. The screen recordings appear in interaction records in agent timeline searches. If a screen recording is available for the selected agent, and if the privilege is enabled, then the Watch screen recording button is shown to the supervisor.


BPO Client group

Listening to call recordings and view chat transcripts on services in reviewer role

With this privilege granted, the user may listen to call recordings and view chat transcripts of the services to which the user is assigned as a reviewer.




  1. REDIRECT 5.3:Agent-guide/Setup/UserProfile


Report Generation

When you select option Reports from the menu on the left, the application pane will display the list of available reports. By default, these are the predefined reports supplied with Bright Pattern Contact Center. If you have previously created some custom reports using Jaspersoft Studio and uploaded their definitions into the system, such custom reports will also appear in the list of reports. For more information about stock and custom report definitions, see section Report Templates of the Contact Center Administrator Guide.


Reports overview


The reports are grouped by the type of contact center resources that they describe. Within each group, the reports are listed in alphabetical order according to the names of the corresponding report definitions. A description is provided for each report. If a description does not fit on the screen, hover over it to see the full text of the description in a tooltip box.

Select the desired type of report from the list. In the view that appears, use the report generation filters to select the resource for which you want to generate the report and to specify the reporting interval. Depending on the report type, you can select multiple resources and apply additional filters.


Report generation filters


Agent Selection Options

For reports where the agent drop-down selector is present, please note the following:


An example of searching for agent names starting with the letter "L"



Agent names displayed as grey, italicized text indicates activity recent to the search period but not within the period



How to Clone Reports

To create a copy of a report, click the Clone button.


Clone


The report you clone can be found in the list of available reports under Clone of Report Name; from here you may rename and customize the report.


Clone of ...


How to Delete Cloned Reports

To delete a cloned report from the list of all reports, click the Delete button. Note that it is possible to delete cloned reports only. The selected report will be deleted from the full list of reports available for your contact center.


Delete


How to Rename Reports

To rename a report, click the Rename buttton; a dialog window will pop where you will enter the report's new name. The selected report will display the new name and will be available from the full list of reports available for your contact center.


Rename


How to Run Reports

To generate the report, click the Run Report button at the bottom of the report details pane. Report generation may take a few moments.


Run Report


The report will appear in a separate browser tab/window and occupy the entire available browser window space. Thus, you can have multiple reports open in your browser at the same time. Generated reports will continue to be available for viewing even when you close the Contact Center Administrator application. Depending on the amount of data, the generated report may occupy more than one page.


The generated report opens in a new browser tab/window


How to View and Use the Generated Report

The generated report appears as a static table of data within your browser tab/window. Usable links for navigation and export are located at the top of the page. If you export the report to a format such as .XLS, you can filter, sort, and reformat the data just as you would for any other spreadsheet.

Navigation

To navigate through the contents of the report, use the page navigation arrows or enter the page number you wish to view.

Metrics

To learn more about the metrics provided by each report, see sections Detail Reports and Aggregate Reports.

Exporting Reports

To export the generated report, choose the format (PDF, XLS, CSV, or TXT), and click the corresponding link.

Running the Report Again

To run the same report for a different resource and/or different reporting interval, simply change the filter setting and click the Run Report button again.

Going Back to Reports

To return to the list of reports, go back to the Contact Center Administrator application, section Reports, in your other browser tab or window.


How to Customize Reports

To customize the presentation of the report, click the Customize button.


Click Customize


The report will be opened in a new browser tab or window in the Report Customizer application.


Using the Report Customizer application to customize columns and report contents


This web application allows you to do the following:

Other Actions


Scheduling Reports

You can also schedule automatic generation of reports and their delivery to specified destinations as email attachments or via FTP. For more information, see Scheduling Reports.



Report Generation

When you select option Reports from the menu on the left, the application pane will display the list of available reports. By default, these are the predefined reports supplied with Bright Pattern Contact Center. If you have previously created some custom reports using Jaspersoft Studio and uploaded their definitions into the system, such custom reports will also appear in the list of reports. For more information about stock and custom report definitions, see section Report Templates of the Contact Center Administrator Guide.


Reports overview


The reports are grouped by the type of contact center resources that they describe. Within each group, the reports are listed in alphabetical order according to the names of the corresponding report definitions. A description is provided for each report. If a description does not fit on the screen, hover over it to see the full text of the description in a tooltip box.

Select the desired type of report from the list. In the view that appears, use the report generation filters to select the resource for which you want to generate the report and to specify the reporting interval. Depending on the report type, you can select multiple resources and apply additional filters.


Report generation filters


Agent Selection Options

For reports where the agent drop-down selector is present, please note the following:


An example of searching for agent names starting with the letter "L"



Agent names displayed as grey, italicized text indicates activity recent to the search period but not within the period



How to Clone Reports

To create a copy of a report, click the Clone button.


Clone


The report you clone can be found in the list of available reports under Clone of Report Name; from here you may rename and customize the report.


Clone of ...


How to Delete Cloned Reports

To delete a cloned report from the list of all reports, click the Delete button. Note that it is possible to delete cloned reports only. The selected report will be deleted from the full list of reports available for your contact center.


Delete


How to Rename Reports

To rename a report, click the Rename buttton; a dialog window will pop where you will enter the report's new name. The selected report will display the new name and will be available from the full list of reports available for your contact center.


Rename


How to Run Reports

To generate the report, click the Run Report button at the bottom of the report details pane. Report generation may take a few moments.


Run Report


The report will appear in a separate browser tab/window and occupy the entire available browser window space. Thus, you can have multiple reports open in your browser at the same time. Generated reports will continue to be available for viewing even when you close the Contact Center Administrator application. Depending on the amount of data, the generated report may occupy more than one page.


The generated report opens in a new browser tab/window


How to View and Use the Generated Report

The generated report appears as a static table of data within your browser tab/window. Usable links for navigation and export are located at the top of the page. If you export the report to a format such as .XLS, you can filter, sort, and reformat the data just as you would for any other spreadsheet.

Navigation

To navigate through the contents of the report, use the page navigation arrows or enter the page number you wish to view.

Metrics

To learn more about the metrics provided by each report, see sections Detail Reports and Aggregate Reports.

Exporting Reports

To export the generated report, choose the format (PDF, XLS, CSV, or TXT), and click the corresponding link.

Running the Report Again

To run the same report for a different resource and/or different reporting interval, simply change the filter setting and click the Run Report button again.

Going Back to Reports

To return to the list of reports, go back to the Contact Center Administrator application, section Reports, in your other browser tab or window.


How to Customize Reports

To customize the presentation of the report, click the Customize button.


Click Customize


The report will be opened in a new browser tab or window in the Report Customizer application.


Using the Report Customizer application to customize columns and report contents


This web application allows you to do the following:

Other Actions


Scheduling Reports

You can also schedule automatic generation of reports and their delivery to specified destinations as email attachments or via FTP. For more information, see Scheduling Reports.



API Reference

Bright Pattern uses Postman to host documentation for Bright Pattern Contact Center REST APIs.

Postman is a popular REST API client for testing and documenting APIs with examples in multiple programming languages. To view documentation hosted on Postman, simply click the Get APIs button for the desired API specification, and you will be redirected to Postman's website. From there, you have the option to run the API collection in the Postman application in your own environment.

Note that JavaScript API documentation is available only on help.brightpattern.com (see the links shown on this page).


Agent Desktop APIs

Access Agent Desktop functions using JavaScript; control agent states and handle calls from .NET-based applications.

Configuration API

Automate user provisioning with third-party systems using the Configuration API.

Embedded Desktop API

The Embedded Agent Desktop API allows you to use Agent Desktop directly from your webpage.

Interaction Content API

Download recording audio files along with their associated metadata with the Interaction Content API.

List Management API

Manage the contents of outbound calling lists and Do Not Call lists via third-party applications.

Mobile/Web Messaging APIs

Develop customer-facing mobile/web messaging apps for advanced chat, voice, and video communications.

SCIM-Compliant User Provisioning API

Communicate user identity data between identity providers and service providers.

SMS/MMS API

Send and receive SMS and MMS messages, as well as track delivery status with the SMS/MMS API.

Statistics API

Work with subscriptions, real-time statistics, dispositions, and more with the Real-Time Statistics API.





  1. REDIRECT 5.3:Contact-center-administrator-guide/Security/SecurityPolicy

  1. REDIRECT 5.3:Contact-center-administrator-guide/Security/SecurityPolicy

  1. REDIRECT 5.3:Contact-center-administrator-guide/Security/SecurityPolicy

  1. REDIRECT 5.3:Contact-center-administrator-guide/UsersandTeams/Teams

  1. REDIRECT 5.3:Contact-center-administrator-guide/UsersandTeams/SkillLevels

About Omni QM

Bright Pattern Contact Center Omni QM is a suite of advanced quality management tools designed to facilitate the process of assessing and improving the quality of agent communications across media channels.

Omni QM builds upon Bright Pattern’s existing quality management functionality by introducing advanced quality management features, such as the ability to design evaluation forms, determine an evaluation process, have agents conduct self-evaluations, assign agent score, conduct calibrations for the purpose of improving the evaluation process, and much more.

In addition, Omni QM unifies quality management processes by placing all quality management features into a single application. When Omni QM is enabled, all interaction records, interaction search functions, evaluation forms, and other quality management tools are accessed via an evaluation console built into the Agent Desktop application. This means that supervisors no longer have to visit the Contact Center Administrator application to access interaction records and grade them; instead, supervisors can monitor, search, review, and evaluate their team’s interactions without ever leaving Agent Desktop. Moreover, agents can easily view their own interactions, evaluations, and quality score from Agent Desktop. Omni QM gives users a bird’s eye view of interaction quality across all channels and services.

Omni QM is a feature option that is built in to Bright Pattern Contact Center, enabled as part of your organization’s contract.

What Is Quality and Quality Management?

In the contact center space, where customer satisfaction determines the success of customer service, we can define quality as consistency in customer service delivery, communications, knowledge of product/service, employee performance, technology, and resources.

Customers expect to receive the same level of care from any agent they interact with and on any channel in which they reached your business. We can meet this expectation for consistency by using quality management processes and tools.

Quality management helps contact centers to meet customer requirements, make all efforts to exceed customer expectations, facilitate agent development, ensure consistency of quality of provided services, and provide a path to achieve it all.




About Omni QM

Bright Pattern Contact Center Omni QM is a suite of advanced quality management tools designed to facilitate the process of assessing and improving the quality of agent communications across media channels.

Omni QM builds upon Bright Pattern’s existing quality management functionality by introducing advanced quality management features, such as the ability to design evaluation forms, determine an evaluation process, have agents conduct self-evaluations, assign agent score, conduct calibrations for the purpose of improving the evaluation process, and much more.

In addition, Omni QM unifies quality management processes by placing all quality management features into a single application. When Omni QM is enabled, all interaction records, interaction search functions, evaluation forms, and other quality management tools are accessed via an evaluation console built into the Agent Desktop application. This means that supervisors no longer have to visit the Contact Center Administrator application to access interaction records and grade them; instead, supervisors can monitor, search, review, and evaluate their team’s interactions without ever leaving Agent Desktop. Moreover, agents can easily view their own interactions, evaluations, and quality score from Agent Desktop. Omni QM gives users a bird’s eye view of interaction quality across all channels and services.

Omni QM is a feature option that is built in to Bright Pattern Contact Center, enabled as part of your organization’s contract.

What Is Quality and Quality Management?

In the contact center space, where customer satisfaction determines the success of customer service, we can define quality as consistency in customer service delivery, communications, knowledge of product/service, employee performance, technology, and resources.

Customers expect to receive the same level of care from any agent they interact with and on any channel in which they reached your business. We can meet this expectation for consistency by using quality management processes and tools.

Quality management helps contact centers to meet customer requirements, make all efforts to exceed customer expectations, facilitate agent development, ensure consistency of quality of provided services, and provide a path to achieve it all.




  1. REDIRECT 5.3:Contact-center-administrator-guide/QualityManagement/CallRecording

  1. REDIRECT 5.3:Contact-center-administrator-guide/UsersandTeams/Roles

  1. REDIRECT 5.3:Agent-guide/Setup/UserProfile

  1. REDIRECT 5.3:Agent-guide/UserInterface

Omni-Channel Routing

Bright Pattern Contact Center enables contact center agents to handle multiple interactions of different media types simultaneously. The agent’s availability to handle an interaction is determined via a capacity model that takes into account how much of the agent’s capacity is occupied by interactions of various media types that the agent is already handling, how much spare capacity the agent must have to be able to handle an interaction of a specific media type, and relative priorities of various media types.

To configure agent capacity, select the Omni-Channel Routing option from the Call Center Configuration menu.


Call Center Configuration > Omni-Channel Routing


Screen Properties

The Omni-Channel Routing screen properties are described as follows.

Capacity share taken by each interaction

This feature specifies the percentage of total agent capacity occupied by a single interaction of the given media type.

In the default feature settings shown, the capacity share is:

Using those capacity share features as an example, an agent handling a single call will be 100% busy, while an agent handling a single chat session will have 75% spare capacity (i.e., 100% – 25% = 75%).

For multimedia interactions such as rich contact, the total capacity share is the sum of capacity shares of all media types involved.

Required spare capacity to receive interaction

This feature specifies the percentage of spare capacity that agents must have in order to receive an interaction of the given media type.

In the default feature settings shown, the required spare capacity is:

Using those required spare capacity settings as an example, an agent handling three service chats may still receive another chat, but not email because the agent's spare capacity of 100% is only sufficient for the agent to get one more chat.

Precedence

Precedence is the order in which interactions of the given media type will be distributed to agents relative to interactions of the other media types (i.e., when competing for the same available agent).

In the default settings shown, the precedence is:

Using those precedence features as an example, if an agent becomes simultaneously available for a chat and an email interaction waiting in queue, the chat interaction will be delivered to that agent first, regardless of how long either of those interactions has been waiting in queue.

This parameter can be set to the same value only for voice and chat. If it is set to the same value, the delivery order of voice and chat interactions will be determined by only their position in queue. Generally, it is recommended that each media type has a different precedence value.

Routing Strategy

If this feature is enabled for your contact center, you can choose the main factor (i.e., after matching agent skills) by which interactions are routed to agents; there are two options: Total Idle Time and Ready Time.

The default option for this feature is Total Idle Time, which is where the system selects the skilled agent with minimum idle time (calculated as a sum of total time in Ready + Not Ready states since the last interaction handled) and available capacity to handle particular interaction types as the main factor.

If Ready Time is selected, the system considers skilled agents who have been in the Ready state the longest as the main factor. If this option is selected and no skilled agents are Ready, the system will use Total Idle Time to deliver the interaction to the agent with available capacity as a secondary factor.

If the Routing Strategy feature is not available for your contact center, the default system behavior is Total Idle Time. For more information, contact your service provider.


How the System Routes Interactions

1. If the Routing Strategy is Ready Time

When a new interaction arrives and its skill requirements are identified, the system will look for agents with matching skills who have been in the Ready state the longest. If no skilled agents are Ready, the system will use the Total Idle Time routing.

2. If there is no Routing Strategy feature OR the Routing Strategy is Total Idle Time

When a new interaction arrives and its skill requirements are identified, the system will look for agents with matching skills and sufficient spare capacity (i.e., occupied at less than 100 – Required spare capacity to receive interaction of the given media type).

If multiple agents satisfying these conditions are found, the system will select one of these agents using the following criteria in the specified order:

  1. The agent with the highest skill level(s); the highest level is determined by the following formula:

    Service Skill Level x 100 + (sum of Auxiliary Skill Levels) / 100 + no. of auxiliary skills.

  2. The least busy agent at the moment; based on Capacity share taken by each interaction currently processed by this agent

  3. The longest idle agent; based on the sum of times of continuous Ready and Not Ready states since the last handled interaction

  4. The least occupied agent; based on agent occupancy since login; occupancy is defined as:

    Busy time / login timeNot Ready time

    In that instance, Busy time is the sum of handling times of all interactions processed by the agent multiplied by Capacity share taken by each interaction, depending on the media type.


When an agent’s load decreases (an agent completes processing of an interaction), the system will look for interactions with matching skill requirements that the agent may have sufficient capacity to handle. The interactions will be considered in the order of Precedence. If multiple interactions within the same precedence are found, the system will select one of these interactions using the following criteria:

For more information about how routing happens within scenarios, see the Scenario Builder Reference Guide, section Find Agent.



  1. REDIRECT 5.3:Contact-center-administrator-guide/Directory/Softphones

  1. REDIRECT 5.3:Agent-guide/Setup/PhoneDevice

  1. REDIRECT 5.3:Contact-center-administrator-guide/Directory/Softphones

  1. REDIRECT 5.3:Contact-center-administrator-guide/Directory/Hardphones

  1. REDIRECT 5.3:Contact-center-administrator-guide/Directory/Hardphones

  1. REDIRECT 5.3:Contact-center-administrator-guide/CallCenterConfiguration/Voicemail

  1. REDIRECT 5.3:Contact-center-administrator-guide/UsersandTeams/ForwardingandVoicemailOperation

  1. REDIRECT 5.3:Agent-guide/Setup/Voicemail



Installing and Updating the Agent Desktop Helper Application

The Agent Desktop Helper Application is a software component that provides many functions for the Agent Desktop application, such as a softphone, screen-pop, logging, indication of audio device changes, alerts on all audio devices, screen recording and monitoring, and voice quality monitoring.

From time to time, you may be prompted by Agent Desktop to install the Agent Desktop Helper Application on your computer or enable it in your web browser. This article will guide you through the process of downloading, installing, and enabling the application on any browser.

You don't need local system administrative privileges on your PC to set up and use Agent Desktop and Agent Desktop Helper Application

When Do You Need the Agent Desktop Helper App?

You may be prompted by a warning message to download and install the Agent Desktop Helper application when...

A warning message such as the one shown contains instructions for installing and enabling the Agent Desktop Helper Application component on your computer. The exact text of the message and your actions will depend on the browser you are using.


Agent Desktop update message


How to Enable the Application for Various Browsers

The Agent Desktop Helper Application is supported on Google Chrome, Microsoft Edge, Microsoft Internet Explorer, Mozilla Firefox, and Safari. Some browser extensions or other settings may need to be enabled, depending on your browser.

Chrome

The Agent Desktop Helper Application is enabled for Chrome using an extension called Agent Desktop Chrome Extension.

How to Enable the Extension for Chrome

  1. When prompted by the warning message, follow the instructions to download and install the Agent Desktop Helper Application (Mac: bpclient_mac.pkg, Windows: BPClientSetup.exe).

    Agent Desktop update message


  2. After installation is complete, go to the Chrome Web Store and click Add to Chrome to get the Agent Desktop Chrome Extension.

    Chrome Extensions > Agent Desktop Chrome Extension


  3. Then click Add extension.

    Confirm that you want to add the extension


  4. Go to Settings > Extensions (or type “chrome://extensions/” in your browser’s address bar), find the Agent Desktop Chrome Extension, and set the slider to On. Doing so will enable the extension for Chrome. When the slider is gray, the extension is not enabled. When the slider is blue, it is enabled.

    Chrome Settings > Extensions > Agent Desktop Chrome Extension


  5. Alternatively, you may enable the extension by clicking Details and setting the slider to On. The other settings in Details are optional.

    Agent Desktop Chrome Extension details


  6. Go back to the Agent Desktop application and refresh the page. You can now begin using it.


Edge

The Agent Desktop Helper Application is enabled for Microsoft Edge 85 and later using an extension called Agent Desktop Chrome Extension.

How to Enable the Extension for Edge

  1. When prompted by the warning message, follow the instructions to download and install the Agent Desktop Helper Application (Windows: BPClientSetup.exe).

    Agent Desktop update message


  2. After installation is complete, go to the Chrome Web Store and click Add to Chrome to get the Agent Desktop Chrome Extension.

    Adding the extension


  3. Then click Add extension.

    Confirm that you want to add the extension


  4. You will then see the extension's icon in the Edge toolbar. To check that the extension is enabled for Edge, click the icon and then click Manage extensions.

    Click Manage extensions to enable the extension for Edge


  5. Set the slider to On to enable the extension for Edge. When the slider is black/white, the extension is not enabled. When the slider is blue, it is enabled.

    Manage extensions > Agent Desktop Chrome Extension


  6. Go back to the Agent Desktop application and refresh the page. You can now begin using it.


Firefox

The Agent Desktop Helper Application is enabled for Firefox version 53 and later through the use of an extension called Agent Desktop Extension.

How to Enable the Extension for Firefox

  1. In Agent Desktop, you will be prompted by a warning message.

    Example of an Agent Desktop warning message


  2. Follow the instructions in the message to download the Agent Desktop Helper Application (Mac: bpclient_mac.pkg, Windows: BPClientSetup.exe) and install and enable the Agent Desktop Extension:

    1. Click the downloading link to download the application.

    2. Run the installer, and follow all the instructions given on your screen.

    3. Click the Agent Desktop Extension link in the warning message to install the Agent Desktop Extension. Doing so will bring up a Firefox dialog such as the one shown, asking you to allow the Agent Desktop Extension to be installed as an add-on. Click Continue to Installation.

      Example dialog for Firefox add-on installation


  3. Make sure that the extension is enabled in Firefox Add-ons. Go to Firefox Menu > Add-ons (or type about:addons in the address bar of the browser to access the extension).

    Firefox > Menu > Add-ons


  4. The Agent Desktop Extension should be shown as Enabled, and the slider should be switched to On. When the slider is gray, the extension is not enabled. When the slider is blue, it is enabled.

    Agent Desktop Firefox Extension in about:addons


  5. If you click on Agent Desktop Extension, you can view and change the other settings for the extension. Those settings are optional.

  6. You can now return to the Agent Desktop application. Refresh the page to begin using it.


Internet Explorer

Internet Explorer does not require an extension, but if you use Internet Explorer 11 or higher, the browser's Enhanced Protected Mode must be disabled in order for all Agent Desktop application logs to appear in the same folder (e.g., “C:\Users\<UserName>\AppData\Local\Temp\logs”).

The logs provide information about what has happened in the application while you were logged in. Having logs is important because you may need to provide them to your supervisor or administrator if ever you need troubleshooting assistance.

How to Disable Enhanced Protected Mode

  1. In the browser application, click Tools (Alt+X) and select Internet options.

  2. Click the Security tab, and deselect the Enable Enhanced Protected Mode checkbox.

  3. Click OK.

Safari

The Agent Desktop Helper Application is enabled for Safari 10, 11, and 12 on Mac OS X 10.12 (Sierra) and higher through the use of an extension, which is packaged in the Agent Desktop Helper Application installer (bpclient_mac.pkg). The installer will detect the OS X version your system is running on and will install the extension only if needed.

How to Enable the Application for Safari

  1. When prompted by the warning message, follow the instructions to download the Agent Desktop Helper Application (bpclient_mac.pkg).

    Agent Desktop update message
  2. Follow the prompts to install “CSIM Client Plugin.”

    Install CSIM Client Plugin


  3. After installation is complete, refresh the Agent Desktop webpage. You can now begin using it.


Mac Security/Privacy Settings

If you are on a Mac, note that you may have to update your security/privacy settings, in addition to all the aforementioned steps for installing/updating the Agent Desktop Helper Application on various browsers.

In your privacy settings, allow both "Agent Desktop Helper" and "bpclient" apps to use the microphone. This step is required, no matter which web browser you are running.


Example of allowing apps to use the microphone in Security & Privacy > Privacy


Other Updates

From time to time, the Agent Desktop Helper Application may have to be updated to support new system functionality. When a new version of this component becomes available, you may see a warning message similar to the one described above prompting you to upgrade. Follow the instructions of the message to update and enable the Agent Desktop Helper Application component on your computer.

Troubleshooting

This section describes some common issues you might experience and what you should do.

I just installed the Agent Desktop Helper Application but I still get the warning message in Agent Desktop.

What this might mean:

A message says a network issue is disrupting your phone device.

What this might mean:

A message says I logged in with a softphone, but the Agent Desktop Helper app is not installed or is blocked by your computer.

What this might mean:

None of this helps me.

Contact your supervisor and/or service provider to request assistance.




  1. REDIRECT 5.3:Contact-center-administrator-guide/UsersandTeams/Roles


  1. REDIRECT 5.3:Contact-center-administrator-guide/UsersandTeams/Roles