From Bright Pattern Documentation
< 5.8:Supervisor-guide
Revision as of 15:39, 9 July 2019 by Marina (talk | contribs) (Created page with "* '''モニターリング(監視)''' - このモードでは、対話の監視ができます。 通話の場合は、エージェントとお客様間の会話はスー...")
Jump to: navigation, search
Other languages:
English • ‎日本語
• 5.3 • 5.8


スーパーバイザーはチームメンバーが処理しているサービスコールまたはチャットに接続できます。 これは、サービス品質の監視、対話が困難な場合にエージェントのサポートなどを目的とします。 エージェントはスーパーバイザーに対してチャットメッセージを送信するか( パーソナルチャットを参照)、即時のヘルプが必要な場合、対話にフラッグを付けることができます。 対話にフラッグが付くと、エージェントメトリックビューのエージェント状態の横にフラッグアイコンが表示されます。



  • モニターリング(監視) - このモードでは、対話の監視ができます。 通話の場合は、エージェントとお客様間の会話はスーパーバイザーに聞こえますが、どちらもスーパーバイザーの声は聞こえません。 チャットの場合は、対話内容が閲覧できます。 エージェントには、自分の対話が監視されていることが通知されません。 スーパーバイザーがエージェントに対して何かを伝えるときは、チャットを使用しなければなりません。
  • Coach - In this mode, you may provide feedback to agents while observing the interaction. For calls, this means you can hear the conversation between the agent and the customer, and you can talk to the agent. The agent will hear you, but the customer will not. For chats, this means you can see the chat as it is happening and chat with the agent without any indication to the customer.
  • Barge-in - In this mode, both the customer and the agent will hear you speak or see you chat and will be able to interact with to you.

You can connect to a service call or chat using any of the above modes, and you can switch from one mode to another at any time and any number of times during the same interaction. For example, if an agent sends you a chat message requesting help with a difficult call, you can first listen to the call in Monitor mode and then, depending on your assessment of the situation, either switch to Coach mode to provide instructions to the agent or activate Barge-in mode to participate actively in the conversation with the customer.

How to Turn On/Off Supervision Modes

To activate one of the supervision modes:

  • Select an agent from the Agent Metrics View in the right pane of Agent Desktop. The agent must be handling an active interaction and be in the Busy state.
  • The Contact Info Panel will display the monitoring functions.
    • If the Monitor/Coach/Barge-in button displays the desired supervision mode, click the button.
    • If you wish to be connected in a different supervision mode, click the arrow section of the Monitor/Coach/Barge-in button, and select the desired supervision mode from the drop-down menu.

Call Monitoring and Pull Screen controls

When you are connected to an interaction in a particular supervision mode, the Monitor/Coach/Barge-in button will display the “next” supervisor mode (i.e., if the current mode is Monitor, the button will display Coach, and so on).

  • To switch to this “next” mode, click the button itself.
  • To switch to a different supervision mode (e.g., from Monitor directly to Barge-in), click the arrow section of and select the desired supervision mode from the drop-down menu.

If on a call, the system will automatically start call recording as soon as you connect to this call in any supervisor mode. Note also that the system supports simultaneous monitoring of one agent by more than one supervisor.

To stop the supervision activity for this call:

Click the End Call button.

How to View Agents' Context Information Area

At any time during call supervision, you can view the content of the Context Information Area of the monitored agent’s desktop. If this area is used to show any customer data related to the call, this may help you understand the context of the agent-customer interaction. To get the content of the Context Information Area of the agent’s desktop, click the Pull screen button Supervisor-guide-image30.png.

Note that the screen you will see is the screen that the agent received via screen pop (i.e., if the agent has changed screens after the initial screen pop, you will not see those changes). To monitor an agent's screen in real time, use the screen monitoring function.

An example of a supervisor's screen after barging-in on a flagged chat
< 前へ | 次へ >