ハードフォン
ハードフォンは、コール処理を行うために特別に設計されたテレフォニーデバイスです。ハードフォンは、ログイン時にユーザによって設定されるソフトフォンと違って、専用の内線番号が付きます。 Bright Patternコンタクトセンターでは、エージェントデスクトップアプリケーションにログインしている間に、ユーザーがデバイスの設定で内線電話 オプションを選択し、ハードフォン番号を指定すると、ユーザーとハードフォン番号の関連付けが行われます。このような関連付けは、ログインセッション中に維持されます。ユーザがログアウトすると、別のユーザが同じログイン手順に従って同じハードフォンデバイスでログインできます。
パーソナルデスクにハードフォンが常にインストールされているユーザーの場合、前述の関連付けが別の方法で行われます：当該のハードフォンがユーザーの設定で既定のハードフォン番号として割り当てられます（ユーザの既定のハードフォン番号というプロパティを参照）。この場合、ユーザは、ログイン時にデバイスの設定を行うにあたって既定の番号のオプションを選択します。
Bright Patternコンタクトセンターでハードフォンを作成した後、ハードフォンデバイス自体は対応する内線番号用に設定し、システム内で登録しなければなりません。ハードフォンの現在登録状況は、コンタクトセンター管理者アプリケーションで確認できます（以下の現在の登録状況のパラメータを参照）。
For manual hardphone set up procedures, refer to the documentation provided with your hardphone devices. Bright Pattern Contact Center also supports automatic provisioning for Polycom IP phones (see option Phone MAC address below for more information).
To configure hardphones, get their real-time status, and set up their call forwarding options, select the Hardphones option from the Directory menu.
Screen Properties
The Hardphones screen properties are organized into three tabs: Phone, Authentication, and Forwarding. Their configuration settings are described as follows.
Phone tab
Number
Number is the hardphone extension number. This mandatory field must be unique within the contact center. Note that if you use both softphones and hardphones in your contact center, the uniqueness must be observed within the entire range of extension numbers, including the ones assigned to softphones.
Caller ID
Caller ID is the name that will be displayed to other users when they receive calls from this phone.
MAC address
MAC address is the unique identifier of the hardphone device on the physical network. This parameter is optional and is used for possible automatic provisioning of supported hardphone models. Entering or changing the MAC address will automatically enable authentication and will require a new password for the phone (see screen Authentication below.)
Phone registers dynamically as
Phone registers dynamically as is the unique hardphone registration name consisting of the extension number and tenant access domain name.
Current Registration
Current Registration shows real-time registration information for the hardphone, including the IP address, port, registration expiration time, and SIP server host name. The no data value for these parameters normally means that the hardphone is not registered with the system.
Authentication tab
Username
Username is the username for authentication of the hardphone. This field is mandatory.
New Password
New Password is used to change the selected hardphone’s password. Enter the new password here.
Confirm password
Confirm password is the mandatory password confirmation field.
Generate password
Use this button to let the system generate a random password for the hardphone. Note that the generated password will be displayed in clear text only until you close the pop-up window. Thus, you should note and communicate it to the hardphone’s user immediately upon generation. The password will be masked for any subsequent display attempts.
Forwarding tab
General information
The Forwarding tab contains call forwarding settings related to the hardphone extension. These settings are applied regardless of whether users log in with the hardphone temporarily or whether it is used as someone’s permanent (default) hardphone.
Forward all calls for ext…
Forward all calls for ext… indicates whether call forwarding is activated for the hardphone extension.
to
This field is for the phone number to which incoming calls will be forwarded. It must be specified if the Forward all calls to ext… checkbox is selected.
Forward No Answer timeout
Forward No Answer timeout is the time (in seconds) after which incoming calls will be forwarded to the number specified if the user is logged on and does not answer. The amount of time must be specified if the Forward all calls to ext… checkbox is selected. For immediate (unconditional) forwarding, set the timeout to 0.
If the user is unreachable (busy or logged out), incoming calls will be forwarded to the specified number immediately, regardless of this setting.